Description: 0~360 Angle Double Clamp Digital Phase Meter for Phase Sequence Tester △Double Clamp Digital Phase Voltmeter is a multifunctional instrument specially designed for field testing, with high accuracy, high stability, low power consumption and easy to use and other features. It can direct measurement of AC voltage and AC current in the measured circuit which not open-loop, measure the phase between two voltages, two current and voltage current, and indirectly measure the power factor and power of the circuit. Distinguish three-phase phase sequence, transformer wiring group, inductive and capacitive circuit, test secondary circuit and bus differential protection system, Read out the phase relationship between each group of CT in differential protection, check whether the wiring of the electricity meter is correct or not, overhaul the line equipment etc. △ Double Clamp Digital Phase Voltmeter adopt super large LCD display screen, digital high 40mm, and with white screen backlight, display clear and obvious, shows the exquisite and luxurious appearance. △ Double Clamp Digital Phase Voltmeter suitable for electric power, petrochemical, metallurgy, railway, meteorology, industrial and mining enterprises, scientific research institutes, metrology departments, etc 1. Direct measurement of AC voltage and AC current in the measured circuit which not open-loop, measure the phase between two voltages, two current and voltage current, and indirectly measure the power factor and power of the circuit. Distinguish three-phase phase sequence, transformer wiring group, inductive and capacitive circuit, test secondary circuit and bus differential protection system, Read out the phase relationship between each group of CT in differential protection, check whether the wiring of the electricity meter is correct or not, overhaul the line equipment etc. 2. Voltage Range:0~500V; 3. Current Range :0~10A; 4. Phase Range :0~360°; 5. CT Size:Φ8mm Technical Parameters Function Description Function Direct testing of the phase, AC current, AC voltage, AC leakage current, phase sequence; differentiate transformer group, inductive, capacitive circuit n; indirect testing of power factor, power. Power Supply DC9V LR61.5V AAX6PCS Working Current Open backlight max 35mA,the battery continues working about 15 hours; Close backlight, the meter power consumption about 5mA,the battery continues working 100 hours Display Mode LCD display, white screen backlight function, suitable for dark places LCD Size LCD Size:70mm×62mm; Display Area:64mm×54mm Meter Dimensions 196mm×92mm×54mm Sampling Rate About 3 times/second Range AC Voltage: 0~20V/200V/500V AC Current: 0~200mA/2A/10A Phase: 0~360° The amplitude range of the tested singal in measuring phase Measure phase U1-U2:30V~500V; Measure phase I1-I2:10mA~10.00A Measure phase U1-I2 or I1-U2:10V~500V、10mA~10.00A Data Hold In measurement, press HOLD key to hold data,“DH” symbol display Auto Shut Down 15 minutes after boot up, the meter shuts down automatically without any operation, to reduce battery consumption Voltage Detection When the battery voltage is lower than 7.8-8V, low battery symbol display,and remind to replace the battery. Meter Weight Host: 550g(with battery) ; Current Clamp: 170g x 2; Test wires : 250g Test Wire Length 1.5m Current Clamp Wire Length 2m Working Temperature -10℃~40℃; below 80%Rh Store Temperature -10℃~60℃; below 70%Rh Input Impedance Test voltage each gears input impedance: 1MΩ; Measure phase U1U2 voltage input impedance :40KΩ Withstand voltage It took 1 minute to withstand 1000V/50Hz sine wave AC voltage between the meter line and the out shell. Insulation ≥10MΩ between the instrument line and the casing, between the two voltage input terminals Structure Double insulation Packing: Package Outer Package Carton Inner Package Aluminum box Accessory Host 1 PCS Instrument Case 1 PCS Current Clamp 2 PCS Test Wires 4 pcs (red 2 pcs,black 2pcs ) Manual , Warranty Card ,Certificate 1pcs
Price: 300 USD
Location: 合肥
End Time: 2024-10-11T09:29:35.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Power supply:: DC9V alkaline batteries(1.5V AA×6)(battery not included)
Country/Region of Manufacture: China
Display mode:: LCD Display Field64mm×54mm
Clamp Size:acuminate current clamp:: φ7.5mm×13mm
Sample Rate:: About 3 times/second
Test Line Length:: 1.5m
Current Clamp Length:: 2m
Work temperature & moisture:: -10℃~40℃; 80%rh below
Type: Clamp Meter
Storage temperature and moisture:: -10℃~60℃; 70%rh below
MPN: 2022
Brand: VTSYIQI