10 All Silver-Teflon PL-259 Type Crimp Connectors RG-8X, LMR-240, RG-59

Description: Thank you for visiting our store. Your purchase will consist of Ten (10) RFC 63-7402 PL-259 type UHF Crimp/Crimp connectors in individual factory packages. These connectors are for use with RG-8X (mini8), RG-59, LMR-240, RFC-240 and many coax cables in the .240-in. series with single braid or foil + braid shielding. Personal, friendly and fast shipping service is also included. These are not for use with the smaller RG-58 or other cables in the .195-in. series. See our other auctions for connectors for RG-58. Look closely at the fit & finish of this connector. We've provided a photograph of the actual connector; not a stock, representative or generic photo or drawing. Mechanical: Superior quality construction consisting of a 40-micron Silver Plated Brass Body, Center Pin & Crimp Ferrule. DuPont™ Teflon® is the dielectric known for its inert properties, permittivity, strength, and higher withstanding voltages over a wide range of frequencies and temperatures. The center pin is made to be crimped, soldered or both crimp + soldered. Recommended die cavity sizes are .255 for the braid to body crimp and .068 for the center pin crimp. Crimping the connector body to the coax eliminates the chance of damaging the coax with heat especially if using LMR Type or other low loss cables. The new low loss coax cables use gas injected polyethylene dielectric which is very sensitive to heat. Over heat it while soldering the braid to the connector body on a non crimp type connector and the foam insulator can easily distort and melt which can result in damage to the coax causing characteristic impedance changes. Crimp it and forget damage caused by heat. See our auctions for the low cost, ratcheting, professional crimp tool for these and other connectors. We also have only the crimp die if you already have the tool frame. Electrical: 50-Ohm impedance, variable, DC to 300-Mhz (Commonly used in 450-512 Mhz range), Voltage Rating of 500V Peak. Operating temperature range is from -65C to 165C (-85F to 329F). RoHS Compliant by Directive 2002/95/EC. Included with each purchase is the connector technical data sheet which includes cable stripping dimensions and die cavity sizes to use for quality fitment. Additionally, we include a sufficient length of 2:1 heat shrink tubing to give your installation added protection and a professional look. SHIPPING INFORMATION: FREE via USPS First Class Mail with 2-5 day delivery anywhere within the U.S. including Alaska & Hawaii. No international shipping. Email with questions.

Price: 29.8 USD

Location: Summit, Mississippi

End Time: 2024-08-07T21:12:17.000Z

Shipping Cost: 0 USD