1/16 Stug III Engine Deck Fits Das Werks Kit - 16-GTB-21

Description: This Listing Is For: Value Gear Details 1:16 Scale Resin StowageStug Engine Deck For Das Werks Stug III 16-GTB-21 1 Piece For adding to the back of a Das Werks Stug IIINote: Leave Off the gun cleaning tools, and the extra track holder bar on back of crew compartment for proper fit. See picture of Andy's Hobby HQ tank. Unpainted Gray or Brown Resin Stowage It will fit1/16 Tanks, figures, Vignettes etc... These are many other 1/35, 1/48, 1/72 Sets Available: So Please Check our other listings. Helpful Tips - Working With Resin Parts: Sanding: Use a dust mask and safety glasses when sanding. Resin, plastic, wood or other fine ground dust can be harmful. Gluing: Resin parts need to be glued with "CA Glues" (Cyan Acrylate), Super Glue or Epoxy Putties. Normal model cement will not work on resin. Cleaning/Degreasing: You should clean resin parts with degreaser Painting: All pieces should be cleaned and primed before painting for strongest finish. Most paints will stick to resin but can be easily scratched or scraped off without primer. Bending Resin: Resin bits can be bent and shaped using boiling water. Removing Old Paint: Do not soak resin bits in brake fluid to remove paint. Brake fluid may work on Poly Styrene (kit plastic) but it wills destroy most resins. Engine Deck Set for Das Werks Stug III: Leave off gun cleaning device and extra track bar on back of crew compartment Little Wood Slats: The little wooden slats in “German Tank Bit Sets” are handles for the German crates. lightly sand on the shiney side (crate side), trim any flash, trim handle to fit crate and lightly sand trimmed edge with 80-100 grit to regain rough wood grain. Example Picture Here.

Price: 14 USD

Location: Flagstaff, Arizona

End Time: 2024-08-16T01:19:03.000Z

Shipping Cost: 6 USD