16pc Rifleman Kit MOLLE System ACU Complete Set USGI

Description: 16pc Rifleman Kit MOLLE System ACU Complete Set USGI ARMY - Previously IssuedThis kit is a popular choice for those looking for a practical set of gear. It includes previously issued, fully functional equipment used by the U.S. Army. All the items are made in the USA and feature ACU digital camouflage. To ensure you're getting genuine U.S. government-issued items, look for the National Stock Number (NSN) on each piece. Color: ACU Digital(1) MOLLE Assault Pack - This is the official "issue" assault pack that the Army distributes to deploying units, in addition to the MOLLE Rifleman Set and other items in the RFI ensemble. Can be worn alone or attached to the MOLLE Rucksack. Consists of a large main pocket, zippered front cargo pocket, and a small utility pocket with Velcro® closure for smaller items. Also has a slot for a radio antenna or hydration drink tube. This assault pack is approved for airborne operations.Genuine RFI-Issue MOLLE Assault Pack, currently in use by hundreds of thousands of Soldiers worldwide. Has been issued to Conventional as well as Special Operations Forces.Consists of a large main pocket, a zippered front cargo pocket and separate exterior hydration sleeve.Shoulder straps have quick-disconnect buckles to allow the pack to be "ditched" rapidly in emergency situationsJump-certified and approved for airborne operationsManufactured with pride in the U.S.A.NSN: 8465-01-524-5250 (1) Fighting Load Carrier Vest - This MOLLE II heavy duty US Military FLC load bearing vest will give you the edge in combat situations.Make sure you have the edge in combat with this genuine issue US Military FLC (Fighting Load Carrier) vest! Made of heavy-duty 1000 Denier Cordura nylon, this vest will carry your gear easily with its MOLLE webbing and two inner pockets.Genuine Issue US Military FLC Load Bearing VestConstructed of Heavy-Duty 1000D Cordura NylonMOLLE/MOLLE II Compatible, One Size Fits All with Adjustable Waist BeltMOLLE Gear Webbing and 2 Inner PocketsMade in USANSN: 8465-01-532-2302 (2) Hand Grenade Pouch -Molle Pouch - water resistant nylon material, nylon webbing straps with snaps to attach to MOLLE vests and button snap closure. Holds one standard grenade.Dimensions: (Length) 4 inches x (Width) 2.75 inches x (Height) 2 inches.NSN: 8465-01-525-0589 (3) Double Mag Pouch -Designed to hold two mags each, this pouch features stretch elastic to keep mags from jostling. The wide, heavy hook & loop (Velcro) panels to close the top flap. It folds flat when empty and features a webbing pull tab and a drain grommet on bottom. Exterior dimensions measure approximately 7.5”H x 3.5”W x 2.5"D.NSN: 8465-01-525-0606 (2) M4 Triple Magazine Pouch - Water resistant nylon material, nylon webbing straps with snaps to attach to MOLLE vests. Each Holds three 30 round magazines. Features a flap cover that allows quick access to magazines, snap closure.NSN: 8465-01-525-0598 (1) MOLLE II Bandoleer -The Molle II Bandoleer Pouch is designed to attach to the inside of the Molle II Rucksack, Molle II Assault Pack and Molle II Patrol Pack. They also have a shoulder strap for independent carry. The pouch holds six double magazines. NSN: 8465-01-524-7309 (1) Flashbang Grenade Pouch MOLLE II -A MOLLE II flashbang grenade pouch, made in USA of 100% Cordura nylon. It features a quick release buckle, a grommet drainage hole, and a MOLLE strap on the back.• 100% Cordura Nylon, made in USA• Features a buckle closure top with a drain grommet in the bottom, MOLLE strap on back• Ammunition pouch (designed for a flash-bang grenade, but holds numerous other items, too)• Convenient carry pouch for pens, gps's, small cellphones, etc.• Great for outdoors, camping, hiking, survival, zombie hunting, prepping, etcNSN: 8465-01-524-7324 (2) 1 QT Utility Pouch Canteen Cover - Made of heavy-duty nylon Cordura® and measures approximately 7" tall X 5" wide X 3" deep. Flap cover with a Fastex buckle closure. An elastic draw cord around the neck to hold the canteen in place if the flaps are not secured. On the exterior are two small pockets measuring 3 ½ X 3" X ¾" deep. 2 Straps on back to secure to belts, backpacks etc Genuine Military 1 Qt. Canteen: Made of high density polyethylene (hdpe) plastic. rigid, single wall construction. Screw cap. holds any type of liquid. fits into GI canteen covers. Issued by the U.S. Government! Made in USA!Made of heavy-duty nylon Cordura®Dimensions: approximately 7" tall X 5" wide X 3" deepIssued by the U.S. Government! Made in USA!NSN: 8465-01-525-0585 (1) Hydration Carrier System 100oz/3L (no bladder) -This system is the way to go when you are seeking portable hydration. This system is an ideal way to keep hydrated when you are on the go: hiking, jogging or bicycling. The GI MOLLE II hydration carrier is constructed of water-resistant 500-denier nylon laminated to a single-cell foam backing; insulated to maintain the liquid temperature within the hydration system. It can hold the 100oz bladder and features quick slide-release buckles on both shoulders and chest strap, adjustable chest, and shoulder straps, a carrying handle at the top and one in the center of the carrier and two D-rings as attachment points for additional MOLLE components.Measures 19" x 7.5"M.O.L.L.E. II Backpack Pouch will Strap or Clip Other Items to Back of CarrierCarrying Handle at the Top and One in the CenterCordura Outer Shell for Abrasion Resistance Laminated to a Foam Insulated Inner Lining to Help Keep Water CoolAdjustable Chest and Shoulder StrapsIntegrated Shoulder Strap Assembly for Carrying, and Pull Handles Located on the Top and Front of the System to Help Locate When in Rucksack or Assault PackQuick Slide Release BucklesD-Rings for Attachment PointsModular Webbing on the Front Allows for the Attachment of M.O.L.L.E. Compatible PocketsGenuine U.S. Military IssueNSN 8465-01-525-5531 (1) Waist Pack -This is a genuine issue ACU waist pack, also known as a butt pack or fanny pack from the U.S. Army. It is a handy item if you need some more storage. By being a U.S. Military issue item, you know it has been constructed to military indications and is created with high-quality solid construction and heavy-duty components. It features a quick-release buckle at the waist, a metal zipper, and a zippered compartment. This waist pack can work on its own or can be attached to the ACU assault pack or rucksack with its adjustable MOLLE straps. Also, its adjustable buckle allows for a proper fit around a wide range of waist sizes.100% Nylon CorduraWater-resistantAdjustable compression strapsAdjustable waist buckleMade in USANSN: 8465-01-524-7263 (1) Entrenching Tool Carrier - The US genuine issue MOLLE II ACU Entrenching Tool Cover made by Eagle Industries / Specialty Defense was designed to carry the army issue shovel. The 1000 denier nylon MOLLE II ACU Entrenching Tool Cover cover is very versatile, it will hold a variety of items other than an entrenching tool. The MOLLE II ACU Entrenching Tool Cover attaches to belts or MOLLE compatible gear. The MOLLE II ACU Entrenching Tool Cover fits most major brands of folding shovels, including the Grumman, SOG and Gerber folding shovels. Specs: US Military Issue Buckle closure on front MOLLE webbing and straps Dimensions 7″ x 10″ x 2 1/2″ 1000 Denier heavy duty nylon Made in USA Brand : Eagle Industries | Specialty Defense**Entrenching Tool not included**NSN: 8465-01-524-8407 Welcome to Ozark Outdoorz!Ozark Outdoorz is a veteran-owned business that was founded in 2016. Being veteran-owned, we have a deep appreciation for our prior service military, active military members, and law enforcement. While most of our products were primarily designed for our military, we realize that civilian consumers enjoy our products for recreational use as well. Whether you are preparing for a hike, trip to the range, prepping, or collecting, we bring these battle tested items to you with full confidence that it will surpass your expectations.

Price: 64.25 USD

Location: united states

End Time: 2024-08-20T15:58:15.000Z

Shipping Cost: 0 USD