2pcs McIntosh Classic Big Blue DB VU Meter Level Amplifier w/ Driver Board

Description: 2pcs VU Meter Header Panel DB Level McIntosh Classic Blue w/ Driver Board It's a new model, suitable for a case with a panel width of 430mm, the dial still continues the classic Maijingtu style! Parameters:*Size: see the product picture;*Pointer material: zinc white copper*Pointer color: black*Pointer swing direction: from left to right*Pointer length: from the central axis to the needle end 54±1mm*Pointer width: 0.45 ± 0.05mm*Meter use direction: vertical*Internal impedance: 500 Ω ± 10%*Current sensitivity: 1000uA ± 10%*Use / storage temperature limit: -10 ° C to +60 ° C RH 35 to 85% 1. Test experiment bulb: 4pcs white LED 2.8-3.0V backlight2. Soldering conditions: Place the terminal about 3 mm into the tin plate at 230 °C for 3.5 seconds. After the test, the 7-14 items remain normal. 3. Soldering temperature: The temperature of the hand-held soldering gun is 350 °C, the terminal is in contact for 3.5 seconds, and the front end of the terminal is about 3 mm in contact with the soldering gun. After the test, the 7-14 items remain normal. 4. Anti-static: Test with the dry nylon cloth on the surface of the transparent cover in the same direction three times. The difference between the markings on the scale is less than 1/3 of the scale length, and the zero return position after three seconds. Characteristics:1. Insulation resistance: 500V DC plus 50M ohm or more for the outer box and electrical circuit of the meter. The insulation resistance of the meter case and the electrical circuit is tested by the 500V DC voltage.2. Zero position: The electric meter uses the standard posture. The position where the front end of the pointer is combined with the center of the zero scale is the reference. The tolerance of the pointer and the zero scale overlap is ±1mm.3. Equilibrium: The allowable error range of the meter when the standard position is tilted 90 degrees back and forth ±1mm4. Sticker: Instantly add three times the over-current of the full-scale current and slowly reduce it to the reading of the current sensitivity of 1/2. At this time, the pointer will return to the scale of 1/3 of the scale.5. Friction: When the current is added to the meter and slowly increased or decreased to a certain value, the error range of the indication point is ±1mm.6. Brake: Instantly add the current value of the scale 2/3, within one second from the start to the time required for the pointer to indicate the positionDriver Parameters:Model: TS-VU003 Working voltage: DC/AC 12-18V Output current: <50mA PCB Size: 74x50mm Meter calibration function: support Backlight power output: 2V-12V 100mA (automatically adjust the output voltage according to the backlight voltage of the VU meter) Model input: ≤5V rms Tungsten lamp, LED backlight voltage: automatically adjust the output voltage according to the backlight voltage of the VU meter Package: 2x Big VU Meater Header1x Driver Board Shippment: International shipping requires complicated shipping procedures (such as both countries customs, transit stations etc.), also will be affected by many factors, such as holidays, weather conditions etc, If you have not received your shipment after long time days from payment, please contact us.

Price: 52.39 USD

Location: wuhan, 湖北省

End Time: 2024-09-06T07:07:47.000Z

Shipping Cost: 6 USD