2x30mm H&R wheelspacers for BENTLEY Continental, Flying B6055571

Description: H&R Wheel Spacers Black Edition Width: 2 x 30mm PCD: 5x112 Centerbore: 57,1mm H&R wheel spacer system DRA Black Edition H&R Spacers DRA 2x30mm B6055571 for BENTLEY Continental, Flying H&R TRAK+ Wheel spacers System DRA improve the look as well as the handling of your car and are compatible with both stock and aftermarket wheels. Wheel spacers are an ideal complement to lowering springs or coilovers. By installing H&R spacers, the wheels fill the wheel arches properly, which significantly improves the look and the driving behavior. Product benefits: High strength, light weight aluminium/magnesium alloyPrecision CNC machinedHard anodized for greater surface hardness and corrosion resistanceFit either stock or aftermarket wheelsCompatible with OEM and aftermarket suspension systemsEngineered and manufactured in GermanyThe H&R Spacers 2x30mm B6055571 should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with your wheels. The length of the existing screw sticking out of the rim, must necessarily be smaller than the width of the wheel spacer! All fixing-accessories are included! Two Spacer (= for one axle) H&R product code: B6055571 Please note additional information and vehicle-specific technical notes! DRA = The wheel spacer should be fitted to the axial hub using the fastening bolts provided. The wheels should then be fitted using the existing wheel bolts provided with the wheels. All fixing- accessories are included! 14.) When using DRA-Systems in conjunction with standard-wheels standard-bolts will be too long. They have to be shortened or be replaced by a new bolt Part. No. 1452802. In this case a spanner - TS 17 - must be added to the Board tool box. 21.) When using our 50/60 mm Systems for vehicles with sliding doors you have to check the clearance of the fitting! 25.) Not usable with steel-rims! 7.) The original wheel screw which sticks out of the inner side of the wheel needs to have a permanent thread and it´s length has to be smaller than the thickness of the spacer. Only for cars up to 930 kg wheel load. Fits for: ManufacturerModelConstruction yearCertificate BENTLEYCONTINENTAL Cabriolet (3W_ 394)01.02.2012 --> 01.07.2018TÜV**BENTLEYCONTINENTAL Cabriolet (3W_ 394)01.03.2010 --> 01.09.2017TÜV**BENTLEYCONTINENTAL Cabriolet (3W_ 394)01.03.2011 --> 01.06.2014TÜV**BENTLEYCONTINENTAL Cabriolet (3W_ 394)01.05.2014 --> 01.07.2018TÜV**BENTLEYCONTINENTAL Cabriolet (3W_ 394)01.05.2015 --> 01.11.2018TÜV**BENTLEYCONTINENTAL Cabriolet (3W_ 394)01.06.2006 --> 01.12.2013TÜV**BENTLEYCONTINENTAL Cabriolet (3W_ 394)01.08.2007 --> 01.04.2011TÜV**BENTLEYCONTINENTAL Cabriolet (3W_ 394)01.09.2011 --> 01.12.2015TÜV**BENTLEYCONTINENTAL Cabriolet (3W_ 394)01.09.2012 --> 01.07.2018TÜV**BENTLEYCONTINENTAL Cabriolet (3W_ 394)01.11.2011 --> 01.07.2018TÜV**BENTLEYCONTINENTAL Cabriolet (3W_ 394)01.12.2013 --> 01.07.2018TÜV**BENTLEYCONTINENTAL Coupe (3W_ 393)01.02.2008 --> 01.09.2017TÜV**BENTLEYCONTINENTAL Coupe (3W_ 393)01.05.2014 --> 01.07.2018TÜV**BENTLEYCONTINENTAL Coupe (3W_ 393)01.05.2015 --> 01.07.2018TÜV**BENTLEYCONTINENTAL Coupe (3W_ 393)01.06.2003 --> 01.12.2012TÜV**BENTLEYCONTINENTAL Coupe (3W_ 393)01.09.2007 --> 01.12.2013TÜV**BENTLEYCONTINENTAL Coupe (3W_ 393)01.09.2011 --> 01.07.2018TÜV**BENTLEYCONTINENTAL Coupe (3W_ 393)01.09.2012 --> 01.07.2018TÜV**BENTLEYCONTINENTAL Coupe (3W_ 393)01.10.2009 --> 01.09.2017TÜV**BENTLEYCONTINENTAL Coupe (3W_ 393)01.10.2014 --> 01.07.2018TÜV**BENTLEYCONTINENTAL Coupe (3W_ 393)01.11.2010 --> 01.09.2017TÜV**BENTLEYCONTINENTAL Coupe (3W_ 393)01.12.2013 --> 01.07.2018TÜV**BENTLEYCONTINENTAL FLYING SPUR (3W_)01.03.2005 --> 01.12.2012TÜV**BENTLEYCONTINENTAL FLYING SPUR (3W_)01.09.2008 --> 01.02.2013TÜV**BENTLEYCONTINENTAL FLYING SPUR (3W_)01.09.2010 --> 01.12.2012TÜV**BENTLEYFLYING SPUR (4W_)01.01.2014 --> TÜV** TÜV**: Application based on TUV certificate. ABE**: Application based on general operating license issued by german KBA. FG**: Application based on max load testing report. H&R | Wheel Spacers H&R TRAK+ Wheel Spacers improve the look as well as the handling of your car while being compatible with both the stock and aftermarket wheels. Product Benefits: high strength, light weight aluminium/ magnesium alloy Precision CNC machined Hard anodized for greater surface hardness and corrosion resistance Available in silver and black (depending on application) Fit either stock or aftermarket wheels Compatible with OEM and aftermarket suspension systems Available for a wide range of automobiles Includes detailed mounting instructions for quick and easy installation Delivered with TUV or ABE approval Engineered, manufactured and tested in Germany

Price: 373.7 AUD

Location: Naila, Bayern

End Time: 2024-05-05T11:03:39.000Z

Shipping Cost: 44.95 AUD