3M 7 IN 1 7502 MD HALF MASK Respirator Protection GAS Spraying Painting USA MADE

Description: 3M, 7 IN 1 7502 / 37082 Half Face Mask Reusable Respirator FacepieceProtection For Gas, Chemical Spraying & Painting, Size: MEDIUM, MADE IN USA!! This listing is for the following items: 1 Ea. 3M 7502 / 37082 Medium Half Face Mask Respirator Facepiece2 Ea. 3M 6001 Organic Vapor Cartridge2 Ea. 3M 5N11 N95 Particulate Filter2 Ea. 3M 501 Filter Retainer 3M 7502 / 37082: Advance silicone material for increased comfort and greater durabilityProprietary 3M CoolFlow valve helps makes breathing easierDual-mode head harness adjusts easily for either standard or drop-down modeExhalation valve cover directs exhaled breath and moisture downward to reduce foggingColor coded to indicate size (small, medium or large) for easy identificationThis half facepiece reusable respirator 7500 Series uses advanced silicone material to help provide comfortable and durable respiratory protection. The 3M™ Cool Flow™ Valve helps make breathing easier and can reduces heat and moisture build-up for cool, dry comfort.The 3M Half Facepiece Reusable Respirator 7500 Series helps provide protection against particulates and a wide variety of gases and vapors when used with approved 3M cartridges and filters. When properly fitted and used with approved 3M cartridges and filters, this respirator (commonly referred to as a “mask”) helps provide respiratory protection at concentrations up to 10 times the Permissible Exposure Limit (PEL). This respirator uses an advanced silicone material that provides a softer feel on the face. A unique adjustment design helps reduce pressure points on the face for even more comfort. The 3M Cool Flow Valve helps make breathing easier and can offer cooler and drier comfort for the wearer. Head harness may be adjusted to drop down when not in active use (allows respirator to be removed without taking off hard hat). The exhalation valve cover directs exhaled breath and moisture downward while helping protect the valve area from debris while also making for easier cleaning. Recommended applications include abatement, painting, welding, chemical handling, construction, utilities, mining, pharmaceutical, and smelting. NIOSH, a Federal government regulatory agency, has tested and approved the 7500 Series with 3M cartridges, filters or supplied air systems to help reduce breathing certain airborne contaminants. This half facepiece respirator may be used with 3M Cartridge 6000 Series; 3M Filters 2000, 2200, 7000 or 5000 Series; or 3M Dual Airline Systems against a variety of gases, vapors, and particulate hazards according to NIOSH approvals. Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M half Facepiece Reusable Respirator 7500 Series helps reduce exposure to many contaminants. Enhanced comfort and visibility features make wearing the respirator noticeably more enjoyable.Made from a soft silicone and featuring the 3M™ Cool Flow™ Valve for ultimate comfortBuilt for comfort and convenience Our 3M™ 7500 Series reusable respirators are made from an advanced silicone material to help give your crew comfort throughout their shifts. The adjustable features are designed to help reduce pressure and tension points on the wearer's face, while the adjustable head cradle provides a secure, personalized fit.When this respirator is not in active use, the drop-down feature allows the respirator to be taken off without having to remove a hard hat. A versatile choice The 3M™ 7500 Series is compatible with a wide variety of NIOSH-approved 3M respirator filters and cartridges to help protect your workforce from certain particulates, gases and vapors. When properly fitted and used with approved 3M cartridges and filters, this respirator may help provide respiratory protection at concentrations up to ten times the OSHA Permissible Exposure Limit (PEL).This half face respirator is also compatible with the 3M™ Versaflo TR-600 and TR-800 Powered Air Purifying Respirators and dual airline supplied air systems.Recommended industriesConstructionFood, Beverage, & AgricultureGeneral ManufacturingHeavy IndustrialMarineMining, Oil & GasPharmaceuticalTransportation3M 6001:3M Organic Vapor Replacement Cartridges are used for paint spraying, solvents and pesticides. 3M Organic Vapor Replacement Cartridges are used with 3M 6000 or 6500 or 7500 series face piece respirators. Low-profile design, the 3M Organic Vapor Replacement Cartridges are great choice in respiratory protection for the professional. NIOSH approved for protection against certain organic vaporsSwept-back design allows an enhanced field of view and comfortBayonet compatibility allows use with many 3M half and full facepiece designsWide range of applications reduces inventory needsSimple installation and usage requirements reduces training requirementsThe 3M Organic Vapor Cartridge 6001 helps provide organic vapor protection in a variety of environments. The cartridge may be used for vapor concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepieces. Recommended applications for the cartridge include assembly and mechanical, batch-charging, change-overs, chemical dispensing, clean-up, cleaning, painting, parts cleaning, and seal coating. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. Industries in which this cartridge is commonly used include chemicals, construction, oil and gas, and transportation.This organic vapor cartridge works with 3M Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet holders. The cartridge is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain organic vapors. The cartridge has been assigned the color code black in the NIOSH system.Breathing organic vapors can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M Organic Vapor Cartridge 6001 to help reduce exposure to certain organic vapors.NIOSH-approved for respiratory protection against certain gases or vaporsVersatile, ergonomic, and simple to installDesigned to enhance field of view and comfort on the job, these gas/vapor cartridges feature a low-profile, swept-back design. The 3M™ Gas/Vapor Cartridges are easy to install. Plus, these cartridges are compatible with 3M™ 6000 Series Half Facepieces, 6500/6500QL Series, 7500 Series, 6000 Series Full Facepieces, FF-400 Series, 7800 Series, 3M™ Scott™ AV- 3000 HT and AV-3000 SureSeal Facepieces with AV-632 Bayonet Adapter, thus helping to reduce inventory needs.Easy breathing 3M™ Gas/Vapor Cartridges are designed to balance breathability and long service life. Gas and vapor cartridges use carbon particles to adsorb contaminants, filtering the air that you breathe. 3M™ has designed our cartridges to be easy to breathe through and long lasting by optimizing the layers and depth of the carbon bed, geometry of the cartridge body, and carbon particle size. Help protect your workforceAfter you've determined the contaminants and exposure levels in your work environment, help protect your employees with a properly fitted 3M™ Reusable Respirator and corresponding cartridges. 3M™ Gas/Vapor Cartridges are NIOSH-approved and help provide respiratory protection from certain gas or vapor concentrations up to 10 times the OSHA Permissible Exposure Limit (PEL) with half facepieces and 50 times the OSHA PEL with quantitatively fit tested full facepieces. Not for use in environments that are immediately dangerous to life or health (IDLH) or contain hazardous levels of airborne particulates.Recommended industriesFood ProcessingDesign & ConstructionFacility SanitationGeneral ManufacturingHeavy IndustrialIndustrial MaintenanceMarineMining, Oil & GasMetal Production & FabricationTransportation 3M 5N11: NIOSH approved for environments containing certain non-oil-based particlesUse on top of 3M gas and vapor cartridges with 3M™ 501 Retainer when particles are also presentUse on top of 3M™ 603 Filter Holder and 3M™ 501 Retainer to reduce particulate exposureReplaceable particle filter for cost savingsWide range of applications reduces inventory needs and training requirementsNIOSH approved for environments containing certain non-oil based particles. Use with 3M™ Respirators 5000 Series or 3M™ Cartridges 6000 Series or 3M™ Filter Adapter 603, and 3M™ Filter Retainer 501.The 3M™ Particulate Filter 5N11, N95 helps provide respiratory protection in environments containing certain non-oil based particles. When properly fitted, use with appropriate cartridges for various applications including spray painting, petrochemical and chemical manufacturing, and pesticide spraying for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces, or 50 times PEL with quantitatively fit tested full facepieces. The filter protects against: 1) solids such as those from processing minerals, coal, iron ore, cotton, flour, and certain other substances; 2) liquids or oil based particles from sprays that do not emit harmful vapors; and 3) metal fumes produced from welding, brazing, cutting, and other operations involving heating of metals.The filter works with 3M™ Respirators 5000 Series or 3M™ Cartridges 6000 Series or 3M™ Filter Adapter 603, and 3M™ Filter Retainer 501. The filter is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain non-oil based particles. This filter has been rated N95, which means it filters at least 95% of airborne particles, but is not resistant to oil.Breathing hazardous particles can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M™ Particulate Filter 5N11 to help reduce exposure to certain particles.NIOSH-approved for respiratory protection against certain particulatesReplaceable for cost savingsThese particulate filters are designed to be easily replaced for a cost effective solution. Use 3M™ Particulate Filters 5000 Series with 3M™ Gas/Vapor Cartridges and the 3M™ Filter Retainer 501 to help filter certain particulates including dusts, mists, fibers, and metal fumes in addition to a broad range of gases and vapors. Or, use these filters with 3M™ Filter Adapter 603 and the 3M™ Filter Retainer 501 to help reduce particulate exposures only. These filters are easy to install, requiring minimal training. Plus, the 3M™ Particulate Filters 5000 Series are compatible with 3M™ Half Facepieces 6000, 6500/6500QL, 7500 Series, Full Facepieces 6000, FF-400, 7800 Series, 3M™ Scott™ AV-3000 HT and AV-3000 SureSeal Facepieces with AV-632 Bayonet Adapter, thus helping to reduce inventory needs.Help protect your workforce After you've determined the contaminants and exposure levels in your work environment, help protect your employees with a properly fitted 3M™ Reusable Respirator and corresponding N95 or P95 particulate filter.3M™ Particulate Filters 5000 Series are NIOSH-approved as either N95 or P95 particulate filters and help provide respiratory protection in environments containing certain oil (P95) and non-oil (N95) based particulates when used with 3M™ Half and Full facepieces and additional accessories. These filters help provide respiratory protection from particulate contaminant concentrations up to 10 times the OSHA Permissible Exposure Limit (PEL) with half facepieces and 50 times the OSHA Permissible Exposure Limit (PEL) with quantitatively fit tested full facepieces. Not for use in environments that are immediately dangerous to life or health (IDLH) or require the use of a filter approved to 100 level filter efficiency (N100 to P100).Recommended industriesDesign & ConstructionFood ProcessingGeneralManufacturingMarineMining, Oil & GasTransportationMetal Production & Fabrication 3M 501: Approved 3M system componentDesigned to hold 3M Particulate Filter 5N11 and 5P71/07194 (AAD) (sold separately)Component works with 3M Respirator 5000 Series, 3M Cartridges 6000 Series and 3M™ Filter Adapter 603Color: Translucent whiteMeasures 4” high x 8.5” long x 4.5” wideRefer to the Filter/Cartridge User Instructions for further information.Used to hold 3M™ Particulate Filters 5N11 and 5P71/07194(AAD) in place on top of 3M™ Respirators 5000 Series and 3M™ Cartridges 6000 Series and 3M™ Filter Adapter 603.The 3M™ Filter Retainer 501, Respiratory Protection System Component holds 3M™ Particulate Filters 5N11 and 5P71/07194 (AAD) in place on top of 3M™ Respirators 5000 Series, 3M™ Cartridges 6000 Series and 3M™ Filter Adapter 603 (all respirators, filters, cartridges, and adapters sold separately).

Price: 64.95 USD

Location: West Chicago, Illinois

End Time: 2023-11-16T18:29:16.000Z

Shipping Cost: 0 USD