60Pcs Adhesive PCB Spacer, Support Height 0.24-0.53", Fits PCB Hole 4-4.3mm

Description: What is this?The adhesive PCB insulation isolation heightening standoffs is a component widely used in electronic products. It is used as an assembly bracket for raising, isolating and fixing printed circuit boards. It has the characteristics of adhesive, insulation isolation, heightening design and improved stability.What will I get?Sticky PCB SpacerMaterial: Nylon PA66Color: WhiteBase Size: 19.7 x 19.7 mm / 0.78 x 0.78 InchBody Height: 16.5/16.9/19/21/24/27.5 mm (0.65/0.67/0.75/0.83/0.94/1.08 Inch)Supporting Height：6/6.7/8.7/10.5/13.4/16.8 mm (0.24/0.26/0.34/0.41/0.53/0.66 Inch)Support PCB Hole Diameter: Ø 4.0mm-4.3mm / 0.157 Inch-0.169 InchFits PCB Thickness: 1.2-1.7mm / 0.047-0.067 InchTop Part Size: 10.4mm / 0.41 InchPackage Content: 10Pcs x 6 Different Sizes =Total 60 Pcs PCB Adhesive StandoffsAre there any advantages of the product?Adhesive Spacer: The body of the spacer is made of nylon PA66 material, the backing is made of quality glue, good sticky design makes the sticky PCB gasket firm and not easy to fall off, easy to stick, suitable for a variety of usage occasions.More Stable: The unique fixing ring design enables the PCB spacer to clamp the circuit board firmly, making the circuit board more stable. Widely used in PCB boards, PC boards, computer motherboards, game console circuit boards, etc.How to use it?Easy Installation: First determine the installation position of the insulation standoffs. Then peel off the back adhesive pad from the standoff and stick it on flat surface. Finally install the PCB board on it.What should I notice?Note: Please confirm the size of your PCB hole before ordering to avoid the problem of not being able to use the product due to the unsuitable hole size. 60Pcs Plastic L Type PCB Spacer Insulated Board Motherboard Standoffs w Screws USD 13.9830Pcs Plastic L Type PCB Spacer Insulated Board Motherboard Standoffs USD 11.5415Pcs Plastic L Type PCB Spacer Insulated Board Motherboard Standoffs w Screws USD 7.160Pcs Plastic L Type PCB Spacer Insulated Board Motherboard Standoffs USD 16.8630Pcs L Type PCB Board Mounting Feet Spacer Insulated Motherboard Standoffs USD 8.53Round Spacer Washer Set, 100 Pack 2,5,8,10,12mm for M4 Screws Black USD 6.9360Pcs Adhesive PCB Spacer, Support Height 0.24-0.53", Fits PCB Hole 4-4.3mm What is this? The adhesive PCB insulation isolation heightening standoffs is a component widely used in electronic products. It is used as an assembly bracket for raising, isolating and fixing printed circuit boards. It has the characteristics of adhesive, insulation isolation, heightening design and improved stability. What will I get? Sticky PCB Spacer Material: Nylon PA66 Color: White Base Size: 19.7 x 19.7 mm / 0.78 x 0.78 Inch Body Height: 16.5/16.9/19/21/24/27.5 mm (0.65/0.67/0.75/0.83/0.94/1.08 Inch) Supporting Height：6/6.7/8.7/10.5/13.4/16.8 mm (0.24/0.26/0.34/0.41/0.53/0.66 Inch) Support PCB Hole Diameter: Ø 4.0mm-4.3mm / 0.157 Inch-0.169 Inch Fits PCB Thickness: 1.2-1.7mm / 0.047-0.067 Inch Top Part Size: 10.4mm / 0.41 Inch Package Content: 10Pcs x 6 Different Sizes =Total 60 Pcs PCB Adhesive Standoffs Are there any advantages of the product? Adhesive Spacer: The body of the spacer is made of nylon PA66 material, the backing is made of quality glue, good sticky design makes the sticky PCB gasket firm and not easy to fall off, easy to stick, suitable for a variety of usage occasions. More Stable: The unique fixing ring design enables the PCB spacer to clamp the circuit board firmly, making the circuit board more stable. Widely used in PCB boards, PC boards, computer motherboards, game console circuit boards, etc. How to use it? Easy Installation: First determine the installation position of the insulation standoffs. Then peel off the back adhesive pad from the standoff and stick it on flat surface. Finally install the PCB board on it. What should I notice? Note: Please confirm the size of your PCB hole before ordering to avoid the problem of not being able to use the product due to the unsuitable hole size.Hot Item Round Spacer Washer, 200 Pack Nylon 4.2mm ID x 7mm OD x 2mm L BlackUSD 6.8930 Pcs 16.2 mm Height Adhesive Standoff Reverse Mount Insulation Bracket WhiteUSD 7.99Nylon Round Spacer Washer 3.2mmx7mmx18mm Unthreaded for M3 Screws Black 100PcsUSD 8.4630 Pcs 0.56" Height Adhesive Standoff Reverse Mount Insulation Bracket WhiteUSD 7.84ABS Round Spacer Washer ID 4.2mm OD 7mm L 4mm for M4 Screws, Black, 100PcsUSD 6.88PaymentWe accept eBay payment.Please do not email us to ask for other payment option.We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.ShippingUsually we ship your order out within 24 hours in business day.For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.Return PolicyReturns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.About UsWe are continually expanding our product selection to better serve your need.We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.DescriptionPolicy60Pcs Adhesive PCB Spacer, Support Height 0.24-0.53", Fits PCB Hole 4-4.3mm What is this? The adhesive PCB insulation isolation heightening standoffs is a component widely used in electronic products. It is used as an assembly bracket for raising, isolating and fixing printed circuit boards. It has the characteristics of adhesive, insulation isolation, heightening design and improved stability. What will I get? Sticky PCB Spacer Material: Nylon PA66 Color: White Base Size: 19.7 x 19.7 mm / 0.78 x 0.78 Inch Body Height: 16.5/16.9/19/21/24/27.5 mm (0.65/0.67/0.75/0.83/0.94/1.08 Inch) Supporting Height：6/6.7/8.7/10.5/13.4/16.8 mm (0.24/0.26/0.34/0.41/0.53/0.66 Inch) Support PCB Hole Diameter: Ø 4.0mm-4.3mm / 0.157 Inch-0.169 Inch Fits PCB Thickness: 1.2-1.7mm / 0.047-0.067 Inch Top Part Size: 10.4mm / 0.41 Inch Package Content: 10Pcs x 6 Different Sizes =Total 60 Pcs PCB Adhesive Standoffs Are there any advantages of the product? Adhesive Spacer: The body of the spacer is made of nylon PA66 material, the backing is made of quality glue, good sticky design makes the sticky PCB gasket firm and not easy to fall off, easy to stick, suitable for a variety of usage occasions. More Stable: The unique fixing ring design enables the PCB spacer to clamp the circuit board firmly, making the circuit board more stable. Widely used in PCB boards, PC boards, computer motherboards, game console circuit boards, etc. How to use it? Easy Installation: First determine the installation position of the insulation standoffs. Then peel off the back adhesive pad from the standoff and stick it on flat surface. Finally install the PCB board on it. What should I notice? Note: Please confirm the size of your PCB hole before ordering to avoid the problem of not being able to use the product due to the unsuitable hole size. 60Pcs Plastic L Type PCB Spacer Insulated Board Motherboard Standoffs w Screws USD 13.9830Pcs Plastic L Type PCB Spacer Insulated Board Motherboard Standoffs USD 11.5415Pcs Plastic L Type PCB Spacer Insulated Board Motherboard Standoffs w Screws USD 7.160Pcs Plastic L Type PCB Spacer Insulated Board Motherboard Standoffs USD 16.8630Pcs L Type PCB Board Mounting Feet Spacer Insulated Motherboard Standoffs USD 8.53Round Spacer Washer Set, 100 Pack 2,5,8,10,12mm for M4 Screws Black USD 6.93Hot Item Round Spacer Washer, 200 Pack Nylon 4.2mm ID x 7mm OD x 2mm L BlackUSD 6.8930 Pcs 16.2 mm Height Adhesive Standoff Reverse Mount Insulation Bracket WhiteUSD 7.99Nylon Round Spacer Washer 3.2mmx7mmx18mm Unthreaded for M3 Screws Black 100PcsUSD 8.4630 Pcs 0.56" Height Adhesive Standoff Reverse Mount Insulation Bracket WhiteUSD 7.84ABS Round Spacer Washer ID 4.2mm OD 7mm L 4mm for M4 Screws, Black, 100PcsUSD 6.88PaymentWe accept eBay payment.Please do not email us to ask for other payment option.We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.ShippingUsually we ship your order out within 24 hours in business day.For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.Return PolicyReturns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt. If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.About UsWe are continually expanding our product selection to better serve your need.We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.

Price: 11.34 USD

Location: China

End Time: 2024-09-25T10:24:38.000Z

Shipping Cost: 0 USD