Adjustable Control Arms 2000 - 2009 Dodge Ram 2500 3500 4WD for 1" to 6" Lift

Description: Adjustable Steel Control Arms for 1-6" Lift Heights 00-09 Dodge Ram 2500/3500 4WDStryker Off Road Designs' Adjustable DOM (Drawn Over Mandrel) Control Arms! These are brand new adjustable tubular control arms for the front of a Dodge Ram 1500/2500/3500 4x4. This is for a set of 4, includes 2 uppers and 2 lowers. They definitely allow the best tire fitment as it re-centers the axle in the wheel well. These are sold in a set of 4, because you really need uppers AND lowers to re-center your axle properly. If you've installed any lift, you DEFINITELY need longer control arms! This is because as you lift the truck, the angle on the arms increases, pulling it back in the wheel well. Our arms are powder coated black and come with our decals for the lower arms. Again, these are brand new. They come ready to install, with pre-installed zerk fittings, Daystar PTMEG poly bushings, DOM sleeves, etc. Simply re-use your factory hardware.What sets ours apart from other competitors? We use DOM tubing in the collars of the arms AS WELL as the sleeve. Take a look at the sleeve pics. On the left is our Stryker sleeve. On the right is a competitors. We use heavy wall DOM tubing, with NO split seam, for our sleeves. The issue with the competitors sleeves is they are thinner wall and simply rolled over. This leaves a gap/seam. These arms take a lot of back and forth pressure. Over time, the other sleeves start to pull apart at that seam, creating a sharp edge inside the bushing, causing the bushing to shred from the inside. Our sleeves are DOM, with no seam, and a much heavier wall thickness. These are guaranteed!These adjustable arms also feature 4140 Chromoly fine thread shanks! This material is SAFE TO WELD. While other manufacturers are content to use any old "all thread" material to make their shanks, we did the research to find the best, and SAFEST, material to use for our adjustable arms! Welding changes the composition of metal, and most "all thread" material is NOT considered safe to weld due to these compositional changes. Our shanks are machined, not cast/formed, so welding them is perfectly safe, while the fine thread allows for precise adjustability. Additionally, these shanks are TIG welded to our DOM collars for ultimate strength! Stryker is confident in offering you a LIFETIME WARRANTY on our DOM (Drawn Over Mandrel) control Arms because the Quality of the Engineered Design, Materials used, Manufacturing Process, Finishing and Final Inspection WARRANT ONE!CAD Designed for your HEAVY DUTY TRUCK.Our Heavy Duty DOM control arms will exceed the requirements of your Dodge Heavy Duty truck!Daystar PTMEG* (Polytetramethylene Ether Glycol) bushings to outperform the lower cost RUBBER used in most competitors offerings (including the OEM arm).We also use DOM (Drawn OVER MANDREL) Steel Sleeves to manage the lifetime wear these arms will endure.Stryker's Craftsman Welders build these in HOUSE here in Marysville, TN!Powered Coated in the USA under strict Stryker oversight and inspection.Threaded ZERK fittings for a lifetime of optimal performance!And designed for the EXACT Truck Model, Year and Lift Height to ensure all the measurements AND Components MATCH the requirement. Not a bunch of spacers and shims to make something kind of work!Features:Adjustable Upper & Lower ArmsHigh Density Daystar PTMEG Polyurethane BushingsDOM Collars & SleevesTIG Welded 4140 Chromoly Fine Thread ShanksGrease-able w/ Pre-Installed Zerk FittingsBlack Powder Coated (unless you specify otherwise)Stryker Off Road Design DecalsDodge 2500/3500 4x4 (any cab or engine configuration)Description:Our strong tubular steel construction adjustable control arms are the perfect upgrade to the factory stamped steel control arms. Including heavy wall DOM sleeves and collars, TIG welded 4140 Chromoly fine thread shanks, custom-designed Daystar brand PTMEG poly bushings, and pre-installed zerk fittings, these arms come completely ready to install - Just remove your factory arms and bolt these right in!Our heavy wall DOM sleeves are application specific, and guaranteed to perfectly fit your year model truck (year models have different sizes of hardware, requiring different inner diameter sleeves for optimal fitment). Cheaper rolled sleeves with a seem can split apart, due to stress from movement (see comparison images), shredding your bushings from within!These adjustable arms also feature 4140 Chromoly fine thread shanks! This material is SAFE TO WELD. While other manufacturers are content to use any old "all thread" material to make their shanks, we did the research to find the best, and SAFEST, material to use for our adjustable arms! Welding changes the composition of metal, and most "all thread" material is NOT considered safe to weld due to these compositional changes. Our shanks are machined, not cast/formed, so welding them is perfectly safe, while the fine thread allows for precise adjustability. Additionally, these shanks are TIG welded to our DOM collars for ultimate strength!Kit Contents:(2) Adjustable Upper Control Arms(2) Adjustable Lower Control Arms(2) Stryker DecalsFitment:00-09 Dodge Ram 2500/3500 4WD 1 to 6" Lift HeightTechnical Notes:Also fits all Mega Cab models; Re-uses factory hardware

Price: 399.95 USD

Location: Maryville, Tennessee

End Time: 2023-09-05T16:28:11.000Z

Shipping Cost: 0 USD