C7 Corvette DEADPOOL hood decal

Description: C7 Corvette DEADPOOL hood decal. Want to add more style and looks to your C7 Corvette? Get yourself this C7 Corvette DEADPOOL hood decal C7 Stingray, Grand Sport and Z062014-2019. We recommend a professional to install these as this is not a do-it-yourself for most people. Most tint and vinyl shops will do this for you. These will come a little longer so you’re able to fit it and then trim it. We recommend you remove hood vent for installation of hood decal. When using the wet method, please allow the decal to dry and cure to the surface before pulling up the transfer tape. Different temperatures can effect dry/cure time. Oracle 651 vinylMatte blackMachine cut for that perfect fit *Note: Decal kits should be installed by an experienced installer. This is NOT a "Do It Yourself" project for most people. We will not be responsible for errors during customer installation, only if proven from a certified installer, ( Tint/Vinyl/Wrap installers). Installation Method of Wet Vinyl DecalsDo not install in direct sunlight.Be sure the installation area and surface temperature is between 10°C (50°F) and 20°C (68°F). Know that the wet method is NOT recommended for interior installations and do not store vinyl decals in direct sunlight. Things you need…Installation squeegeeApplication fluid in a spray bottle (Mixture of 500mL (1/2 quart) of water, 250mL (1/4 quart) of 99% rubbing alcohol and 1 teaspoon of liquid soap) –Non-AMMONIA BASED window washing liquidPaper towelsMeasuring tape or ruler.Preparation: Carefully remove all dirt, grease and/or wax from application surface. Be sure to remove the car wax, Turtle wax, Rain-x, compound, etc. The decals will NOT adhere properly to un-cleaned surfaces. Be careful to not use ammonia-based cleaners. This could create bubbles under your vinyl decal. So once the surface is ready, follow below steps… Step 1: Use the squeegee, pressed onto a hard surface. Press firmly over the decal to assure pre-mask is properly attached. Turn the decal over (pre-mask down) and slowly peel off the “liner” exposing adhesive. Do not allow the sticky part of the vinyl decal to touch anything. Generously spray application fluid over the surface area where the vinyl decal will be installed. Be sure the surface area is completely sprayed down and there are generously spray application fluid onto the adhesive side of the decal. Step 2: Place the adhesive side on the surface. While wet, carefully measure and adjust the vinyl decal. Once it is placed, use a squeegee with firm strokes to force application fluid out to assure firm placement. Repeat until you remove most of the application fluid between decal and surface. Ensure there are no fluid or air bubbles. Step 3: Wait between 30 minutes to an hour or more to allow complete drying and secure adherence. Temperature can affect drying time Step 4: Once dry, peel off the “pre-mask” from decal and surface. If peeling occurs, re-apply decal with a squeegee (Step 2), and wait about 30 minutes before you remove the “pre-mask” again. Require immediate payment with Buy It Now Depending on items that are in stock, most items will ship out next day. Some items like custom carbon fiber made by us will require 2-3 or sometime 4 months to make, so the time for shipping showing on Ebay may not make that time and may be longer. All returns must be within 30 days from the date of purchase. Please include your order number in the subject line of the email. Be aware that due to the extreme limited-edition nature of our products, exchanges are possible but not guaranteed. We strive to have 100% satisfaction with all of our customers. If there is an issue with your order or your product, contact us at and we will do our best to make it right. We appreciate our customers and will work with you to be sure you are satisfied with our products.

Price: 75.99 USD

Location: Port Saint Lucie, Florida

End Time: 2024-10-13T17:53:58.000Z

Shipping Cost: 0 USD