DC 6.5V-55V 30A PWM Motor Speed Controller Brush Motor Wireless Remote Control

Description: Product Function Introduction: 1-2-3-4-5-6-7-8-9 function settings are as follows: Slow start time setting function 1: 000-100 slow start to 100% speed time is adjustable between 0-10 seconds. The default is 1 second. Slow stop time setting function 2: 000-100 slow stop time is adjustable between 0-10 seconds. The default is 1 second. Speed lower limit setting function 3: 000-080 the minimum speed is adjustable between 0-80% and is less than the maximum speed setting value. The default is 0. Speed upper limit setting function 4: 000-100 the maximum speed is adjustable between 0-100% and is greater than the minimum speed setting value. The default is 100%. Acceleration/deceleration value setting function 5: 001 002 005 010 015 020 025 the speed changes by 1%, 2%, 5%, 10%, 15%, 20% and 25% each time the acceleration/deceleration key is pressed. Motor running time setting function 6: 1 second minimum -99 hours 59 minutes 59 seconds maximum. The default is 99 hours 59 minutes 59 seconds. Motor stop time setting function 7: 1 second minimum -99 hours 59 minutes 59 seconds maximum. The default is 99 hours 59 minutes 59 seconds. Motor start-stop cycle times function 8: adjustable between 1-999 times. The default is 999 times. With or without timing selection function 9: 0 none, 1 yes. Default is 1 yes. The input must be divided into positive and negative input voltage to be equal to the rated voltage of the motor(within 6.5V-55V). Specification: Input Voltage: DC 6 .5V-55 V ( the specific voltage should be equal to the rated voltage of the motor) Output Voltage: Linear Under Load Instantaneous Current: 30A Continuous Current: within 20A Type of Speed Regulation: Flow Regulation Speed Adjustment Method: Press +/- Wireless Remote Control: Support Timing: Yes Slow Start and Slow Stop: Can Be Set Speed Digital Display: 0-100 Percentage Table Speed Adjustment Range: 0-100% Control Frequency: 15KHZ Battery: 1 x Button Battery(Included) Wiring Type: Fence Type Terminal Block Support Motor: Brush Motor Module Size: 11.6cm x 7.6cm x 3cm/4.57" x 2.99" x 1.18" (Approx.) Package List: 1x DC Motor Speed Controller 1x Remote Notes: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.

Price: 19.99 USD

Location: Whippany, New Jersey

End Time: 2024-09-03T01:21:32.000Z

Shipping Cost: 0 USD