Dental Light Cure Composite Resin Syringe Kit Shade A1/A2/A3/A3.5/B1 DENTEX USA

Description: Dental Light Cure Composite Resin Syringe Kit Shade A1/A2/A3/A3.5/B1 DENTEX USA Shipping from C/O 2125 Gateway Blvd, Hebron, KY,41048 United States Feature: Expired in 12 months or better! NDICATIONS FOR USE:Direct restoration for all class caries.Restoration of teeth defect and veneer. Package:Light Cure Composite: 4g/Syringe*5（A1 A2 A3 A3.5 B1）Syringe Needles : 5pcs/ box*1Total Etching Adhesive: 5ml/Bottle*1Etching Gel: 5ml/Syringe*1Applicators Brushes: 20pcs/box*1Net weight: 188.4g COLOR: A1,A2,A3,A3.5,B1 FEATURES & ADVANTAGES:Unique dispersion technology ensure the filler evenly distributedRadioopaque and fluoride releasing Optimal polishability and high shade stability.Excellent handling, not sticky to instrument;Suitable for most cases of restoration, extensive indication of usage. INSTRUCTIONS：(1)Preparation: isolate and prepare tooth.(2)Cleaning: rinse the preparation with water.(3)Drying: gently air dry until there is no visible water.Do not allow enamel or dentin to dry for an excessive period of time.(4)Applying Dentex Self-Etching Light Cure Adhesive (DSA):dispense 1-2 drops of DSA into a mixing well, apply enough DSA to the entire preparation with a little brush until a shiny surface is achieved and then wait for 10 seconds (DSA should not be applied too much ). Use a gentle stream of air to evaporate the solvent for 5 seconds. (If using a non self-etching adhesive, an etching step should be used according to the manufacturer's instruction).(5)Cure: light cure for 20 seconds at 500±50mW/cm2. Keep the distance to exposure surface less than 4 mm.(6)Applying Dentex light cure composite (DLC): place selected DLC into cavity preparation following by light cure. According to following table, the curing time is recommended for different depth and color shades. In order to reduce shrinkage stress, for a large cavity, an increment filling is recommended. In general, 1-2 mm increments are placed into cavity preparation from different sides and the restoration is built incrementally. Each increment is light cured for 30 seconds.(7) Finishing: after light cure, adjust restoration.(8) Polishing: use polishing strip or disc to polish the surface WARNING:Do not use this product for patient who is allergy to methylmethacrylate. Do not use this product with any material contained eugenol. PRECAUTIONS:Methmethacrylate resins may cause skin sensitization in susceptible persons. In case of contact, wash skin with soap and water. In severe situation, get medical attention. ATTENTION:To an exposed pulp, a pulp capping material such as Calcium hydroxide may be used before using this product.STORAGE:Store at 25℃ or less in a cool and dry place and avoid direct sun exposure.Recap the syringe after use.DISPOSAL:After the product is used up, dispose it as normal medical rubbish.///////////////////////////////////////////////////////////////////////////////////////////////////////////////// Resin Bonding Adhesive: Visible light curing is a resin adhesive for dentin enamel 5ml. Describe： This product is a one-component liquid, and its main ingredients include UDMA and other multifunctional methacrylic resins. It does not contain solvents and inorganic fillers, and is safe and harmless to the human body. The product is a light-curing adhesive material, which is clinically used for the bonding of dentin and enamel. Suitable for bonding resin materials and ceramic materials. Scope of application： Used for bonding dentine and enamel with resin and ceramic materials. Clinical operation steps: 1. Pretreatment of caries and pulp protection. 2. Use 37% phosphoric acid etchant for treatment, then clean it thoroughly with water, and dry it thoroughly with an oil-free air gun. 3. Apply a layer of adhesive evenly on the tooth surface with a small brush. 4. Make the adhesive layer even as far as possible with the wind power of the air gun. 5. Irradiate with an oral light curing light source of 300mW/c㎡ for 20 seconds to cure the adhesive. 6. Please use the composite resin filling material according to the original manufacturer's instructions, as well as the subsequent grinding and reconstruction processes. Precautions： 1. During clinical use, the lip and adjacent teeth should be well isolated and protected. Avoid contact with eyes, mucous membranes and skin. 2. Phenols, clove oil and zinc oxide can not be used as the bottom material of the first layer,because clove oil contains polymerization inhibitor "phenolic substances", which will directly affect the degree of polymerization of the adhesive. 3. During the curing operation, the distance between the surface of the light curing lamp and the adhesive should be kept below 2mm, but it should not be in contact with the material. 4. Before applying adhesives and composite resin fillings, the tooth treatment surface should avoid contamination by water and other impurities. 5. It is not suitable for pulp capping, and patients who are allergic to resin should not use it. Environment： This product is operated at room temperature. Storage Conditions： This product should be stored in a cool and dry place at 2°C~28°C, avoiding direct sunlight. Shelf Life： This product is valid for 2 years, please do not use expired product. Contraindications: Patients with a history of allergy to methacrylate resins are contraindicated. //////////////////////////////////////////////// Acid Etching Gel 37%: Dental Etchant Gel 37% Phosphoric Acid Etching Silica Gel 5ml FEATURE： 1. Enamel and dentin etching. 2. Apply special technology to obtain ideal density of the gel. 3. Gel in blue color for better visual management. Indication: It is used for acid etching of tooth enamel and dentin before dental repair. Operation Procedure： 1. Remove surface dirt, rinse the prepared cavities, and blow dry. 2. Apply the etching agent from the tooth enamel to the entire surface of the repair, and etch for 20-40 seconds. The acid etching time of deciduous teeth and dental fluorosis can be extended appropriately according to the actual situation. 3. Rinse with clean water after acid etching, and suck out in time. 4. Use adhesives and resins for bonding repair. Model Available: A1A2A3Etching Gel 37%Etching AdhesiveLight Cure Composite Resin Syringe Kit Picture Display： FDA Statement The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, you can bid on this item only if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. You feedback is VERY important to us Please leave us positive feedback, an positive feedback will be automatically left for you once we receive your full payment. Please leave us with any concerns prior to leave negative feedback, please contact me when you have any problem i will do all my best to help you, leave nagetive feedback can do nothing. We will do all my best to help you. Exchanges are offered for items that are defective or damaged when received, although this is highly unlikely. After exchanges are made and have not resolved the issue, we will refund the cost of the merchandise. Defective items or problems with your order must be reported within 3 days after receiving. Please keep all packaging, documentation, packing list,etc. that came with your order. These will be used to verify claims if there is any problem with you. Restocking fee will be charged for returned items without original package or any quality problem.Please contact us for details before returning your package to avoid misunderstanding.IMPORTANT: Customer's item must be returned to our facility with the ROF (Return Order Form) at the buyers shipping expense. The goods you odered will be posted out in the second working day after the paymet has been made. (We will inform you via email if any delay occured due to holiday events. General shipping time is between 7-12 working days. (After the shipping started, the order will be monitored and the track of the item will be posted on paypal. Best Service is what i always persuit at happydental365! If you contact us immediately after placing the order, we will make every effort to assist you with your change request. Unfortunately, we can not make changes or cancel an order once it has shipped. We offer the best items at the best prices. We strive to exceed all your expectations and put a smile on your face. Your experience will be a pleasant and effortless one when you buy at happydental365. We stand behind our products and pride ourselves on OUTSTANDING customer service. We guarantee that you will be delighted with your purchase or we will gladly and promptly issue you a refund or make things right!

Price: 10.95 USD

Location: Hebron, Kentucky

End Time: 2024-10-14T01:56:11.000Z

Shipping Cost: 0 USD