Dive Rite Nomad XT-Harness Side-Mount Rig System, Complete

Description: Dive Rite Nomad XT-Harness Side-Mount Rig System, CompleteSKU: DIV4650P Item IncludesTransPac XT Harness - Nomad XT Wing - Buttplate - 2" Crotch Strap - 2x Loop Bungees - 2x Chokers - LP Hose - Owner's Manual - MFG Lifetime Limited Warranty DescriptionThe Nomad XT is built with the ultimate streamlining in mind. A properly balanced side-mount rig should not require additional weight on the shoulders. Divers who wear heavy tanks or those just getting started with side-mount will often opt this older solution to resolve trim issues. Seeing this makeshift solution in the field, Dive Rite redesigned their off-road side-mount rig with a new, wing design. Narrow at the neck and angled at the sides with more lift added to the bottom, the Nomad XT Wing is designed to give lift where it's most needed - at the hips. Dive Rite also, moved the inflator to the center, behind the neck and added an additional over-pressure relief valve (OPV) to the bottom so divers who wish to swap these can now do so and retain an OPV dump at the bottom of the wing for safe gas dumping when inverted. Made with a super tough exterior and modular flexibility, the outer panels of the wing are engineered using Super-Fabric Brand Technology for optimum resistance to punctures and abrasions, while remaining very flexible. In addition to its rugged exterior, the Nomad XT has the added benefit of being a modular system: the harness, wing, butt-plate and crotch strap are all separate elements. This allows the traveling explorer (or any diver wishing to modify their rig) the ability to trade out wings, remove the butt-plate or make any fit adjustments necessary to meet the objective of the dive mission. A Gusset Control System (GCS) allows you to control lift when switching out various types of cylinders, such as going from steel to aluminum or twin tanks to single. Without the gusset control and without using the wing keepers on the waist belt, the Nomad XT delivers a full 50 lbs (22.68kg) of lift. The Nomad XT Side-Mount Rig comes assembled and includes a Trans-Pac XT Harness, Nomad XT Model Wing, butt-plate and 2" (5cm) crotch strap, plus loop bungees and chokers. The Dive Rite TransPac XT Harness, exceptionally rugged, yet beautifully streamlined, the TransPac XT redefines expectations about function and comfort in Scuba harnesses. Dive Rites radically updated TransPac XT now provides a true mountaineer backpack design with an integrated hip belt, molded foam lumbar support and ergonomic shoulder pads. Available in multiple sizes with easy customization options at the shoulder and waist plate, the TransPac XT is designed to fit any size diver, including children. The TransPac XT evenly balances weight across the hips and back distributing the weight of single or double tanks. The wrap-around hip belt made of dual density foam, snugly hugs the lower back giving critical support and cushioning. Narrow, double foam shoulder pads fit perfectly beneath the 2" (5.1cm) shoulder webbing to give chafe free comfort. The high-tech, molded foam lumbar pad is contoured in all the right places with mesh airflow channels for instant draining topside and doubles as a lift bag sleeve with an integrated pocket. Chest support strap provides ultimate load distribution and when used with the removable, 1.5" (3.8cm) crotch strap provides outstanding stability and comfort in the water. Transition plates at the shoulders allow for quick addition/deletion of hardware and finite adjustments. Dual cam straps with stainless-steel buckles are positioned to give plenty of head room for easy maneuvering in the water. Neutrally buoyant, the TransPac XT weighs less than 5 lbs (2.29kg) and packs flat for travel. Optional weight pockets (see SKU: DIV3232) slide easily onto the waist belt. The soft backpack is 1,000-Denier ballistic nylon and the side plates and hardware are marine grade stainless-steel. The shoulder straps feature pivot rings at chest and Acetyl resin squeeze style quick-release buckles for easy don/doff. There are four 2" (5.1cm) D-rings on each shoulder strap on sizes M-XXL and 2 each on XS & SM. The harnesses 2" (5.1cm) nylon webbing is rated to 7,000 lbs (3175kg) breaking strength. The TransPac XT weighs 4.25 lbs to just less than 5 lbs (1.93 to 2.26kg) depending on size. The Nomad XT Side-Mount Rig is available in single or dual bladder models comes with owner's manual, and is proudly made in the U.S.A.FeaturesNomad XT-Harness Side-Mount Rig System, Complete:Built w/Ultimate Streamlining In-MindDive Rite's Expedition Side-Mount SystemProperly Balanced Side-Mount RigBuilt-On-TransPac XT BaseOff-Road Side-Mount RigNot Only Suited for Side-Mount: Handles Back-Mounted Doubles, Singles, or CCROwner Manual'sMade-In-the-U.S.A.System Size/Weight: MD/9.375 lbs (4.25kg), LG 9.625 lbs (4.36kg), XL/10.06 lbs (4.56kg)Wing: Dive Rite Nomad:Center Top Mount InflatorAdditional Over-Pressure Relief Valve (OPV) at BottomInflator and OPV Position Can-be-SwappedWing Design: Narrow at Neck & Angled at Sides More Lift Added to Bottom Designed to Give Lift Where-It's-Most-Needed - At-the-HipsDive Rite Married Super-Fabric w/1,000-Denier CorduraCreated Armor-Clad Outer-Bag Impervious to Damaging Pinches & CutsHeavy-Duty, Radio Frequency (RF) Welded 210-Denier Nylon Urethane Laminated BladderModular Design System: Harness, Wing, Butt-Plate & Crotch Strap, All Separate Elements Allows Traveling Explorer (or Diver Wishing to Modify Rig) Ability to Trade Out; Wings, Remove Butt-Plate or Fit Adjustments Meet Objective of Dive MissionGusset Control System (GCS): Controls Lift Great for Various Types of Cylinder Use Steel to Aluminum or Twin Tanks to SingleLift Capacity: 50 lbs (22.68kg)Includes: Trans-Pac XT Harness Nomad XT Model Wing Butt-Plate 2" (5cm) Crotch Strap Loop Bungees & ChokersDive Rite Power Inflator w/3/8" Threaded Low-Pressure HoseHarness: Dive Rite TransPac XTExceptionally Rugged, Beautifully StreamlinedRedefines Expectations of Function & Comfort in Scuba HarnessesMountaineer Backpack DesignIntegrated Hip Belt, Molded Foam Lumbar Support & Ergonomic Shoulder PadsEasy Customization OptionsDesigned to Fit Any Size Diver, Including Children!Evenly Balances Weight Across the Hips and BackHarness Usable w/Single or Double TanksWrap-Around Hip Belt Made of Dual Density FoamWrap-Around Hip Belt: Snugly Hugs Lower Back Giving Critical Support & CushioningNarrow, Double-Foam Shoulder Pads for Chafe-Free ComfortMesh Airflow Channels for Instant DrainingMesh Airflow Channels: Doubles-As Lift-Bag Sleeve w/Integrated PocketChest-Support Strap Provides Ultimate Load DistributionRemovable 1.5" (3.8cm) Crotch StrapChest-Support Strap & Crotch Strap: Provide Outstanding Stability & Comfort in WaterTransition Plates at Shoulders for Quick Addition/Deletion of HardwareTransition Plates: Finite AdjustmentsDual Cam Straps w/Stainless Steel BucklesOptional Weight Pockets (see SKU: DIV3232)Soft Backpack: 1,000-Denier Ballistic NylonSide Plates & Hardware: Marine Grade Stainless SteelShoulder Straps w/Pivot Rings at Chest & Acetyl-Resin Squeeze Style Quick-Release Buckles for Easy Don/DoffFour 2" (5.1 cm) D-Rings On-Each-Shoulder Strap2" (5.1 cm) Nylon Webbing: Rated to 7,000 lbs (3175kg) Breaking StrengthWeight: 4.25 lbs to Less than 5 lbs (1.93 to 2.26kg) Depending-On-SizeBuoyancy: NeutralAvailable-In Multiple SizesSpecificationsMaterialsBackpack: 1,000-Denier Ballistic Nylon Nylon Webbing & Molded Foam Hardware: Stainless Steel & Acetyl-ResinCylinder CapacitySingle or Double TanksD-RingsYes, Shoulders: 4 Waist Strap: 2 Crotch Strap: 1Crotch StrapYesHarness WeightMD: 4 lbs 8 oz (2.1kg) LG: 4 lbs 12 oz (2.15kg) XL: 4 lbs 14 oz (2.2kg) XXL 5 lbs (2.23kg)BucklesWaist: Latch-Style Shoulders & Chest: Squeeze Style Quick-Release BucklesWebbing Tensile Strength7,000 lbs (3175kg) Breaking StrengthHarness AssembliesBC BodyWing, Back Inflator, Side-MountBuoyancy Bag50 lbs (22.68kg)ValvesOver-Pressure Relief/Dump ValveOral InflatorDive Rite Power InflatorBCD MaterialsOuter Bag: 1680-Ballistic Nylon Bladder: 210-Denier Nylon Urethane Laminated Grommets: 316-Stainless SteelWeight IntegratedOptional, YesWeight CapacityTotal: 32 lbs (14.52kg) w/Weight Pockets (Optional see SKU: DIV3232)BC/System WeightMD: 9.375 lbs (4.25kg) LG: 9.625 lbs (4.36kg) X: 10.06 lbs (4.56kg) Feedback is a very powerful tool. It gives sellers a reason to conduct business at the highest level of honesty & respect. If you feel like you have a reason to leave neutral or negative feedback, please contact us beforehand, Im sure we can work it out. Please contact us using the ASK A QUESTION link found at the bottom of the page. About us Many years ago Scuba was the first Internet-based divers supply company. We're still the number one store for scuba diving and snorkeling equipment. Thousands and thousands of satisfied customers swear by our service. Contact Us Got a question? Please contact us using the ASK A QUESTION link found at the bottom of the page Hours: Mon-Thu: 9:30-5:30, Friday: 9:30-12:30 Relist Please do not request to have an item relisted if you do not see it any more. If we are able to relist, we will do so even without your request. Item availability We will only post items that are in stock, ready to ship. Payment / Shipping Payment Items can be returned within 30 Days of purchase, and must be returned in original packaging, pending a return authorization. Shipping Most purchases are shipped within 1 day of payment. We will not ship outside of the USA. We supply tracking information 24 hours after the shipment leaves our warehouse. Please check your email and/or Ebay messages & make sure our email doesnt go into spam or junk. No store pick-ups for Ebay items. We will not mark any package as a gift. We do not ship to PO boxes. We ship to APO or FPO addresses, please contact us for more information. Tracking There is no need to email us for tracking info. You will get that automatically. Returns We think you'll agree that Scuba has the best return policy in the industry. You have 60 days from the date of invoice to return the merchandise for full refund. Inspect the equipment when it arrives, and if you're not fully satisfied you can return it for a full refund (less the shipping charge) as long as you haven't used it. We won't even ask why you've changed your mind. You'll need the original manufacturers labeled packaging with all materials, manuals and blank warranty cards. Books, CDs, DVDs may not be returned (due to copyright laws). Sorry. Merchandise returned in used condition or not in its original packaging may be refused, and the carrier will charge you freight in both directions. Please allow 2 days from the date we received the package for us to process your return. ate we received the package for us to process your return.

Price: 998 USD

Location: Elizabeth, New Jersey

End Time: 2024-09-16T11:33:47.000Z

Shipping Cost: N/A USD