Description: Listing is for one APEM 631-H toggle switch rated at 15a 250VAC. This is the toggle switch replacement for a Francis Francis espresso machine. If you have broken switch one of the three switches on your Francis Francis espresso machine you can simply replace it. This switch is easily replaced by unplugging your machine from the AC outlet. Remove front plate screws with screwdriver. You will need to retain the original round front and rear nut on the toggle switch supplied with espresso machine. A pair of pliers will be needed to clamp one or both of the nuts depending on how tight they are. Remove the front round nut by unscrewing and holding old switch with hand or pliers gently. Remove hexagon thin nut off front of old switch and place on front of new switch. Remove the plastic connector off old switch noting orientation, meaning which connector is connected to each of the toggle poles (flat metal spades). Marking top connector prior to removing connector and/or take picture. Insert new toggle switch through front plate and tighten both nuts after screwing on new switch. Orient the wire connectors the same way to the new switch as the old switch was installed and install connectors to the correct pole on the new switch. Replace front plate and test out your new switch!
Price: 5 USD
Location: Monterey, California
End Time: 2024-11-23T23:46:27.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: FrancisFrancis
Type: Power Toggle Switch
Fuse Type: Switch
