Hex Hub Adapters for Kyosho Mini-z 4x4 4-runner Jimny Jeep Barrage SCX24 RC4WD

Description: Hex Wheel Adapters for Mini-z 4x4 4-runner Jimny Jeep Crawler Temper Barrage SCX24 SCREWS INCLUDED!!! This is a full set of adapters and screws. These are custom designed 3d printed plastic wheel adapters for the Kyosho Mini-z 4x4. These allow you to use Hex mountable wheels, the hex pattern is approximately 7mm wide flat to flat (see pictures). I've personally tested with the following wheels/tires without any modifications: Axial SCX24 wheels, ECX Temper, and Barrage. The Losi 1/24 crawler wheels you have to trim the inside of the rim to fit the front. I stand by my work 100%, there are others starting to sell similar items possibly cheaper, which is fine it will happen, but I do stand by my work and will do what I can to make it right if something isn't 100%, this is a hobby for me just like it is for you so I want everyone to be able to enjoy it. What you get:You will get 5 hex wheel adapters, that way you have 1 spare, and 4 long screws. You may want to add a small washer to prevent pull through in the wheel hole, they do not come with washers. See the pictures for details, nothing in the photos are included other than 5 of the 3D printed wheel adapters and 4 long screws. Colors/Materials:Photopolymer Resin: The Photopolymer material is a liquid resin print, super highly detailed! Compared to the other ones there are ZERO loose fibers to possibly clean out, just drop in and go! I use a special mix of resins that provides better strength than typical resin prints.PLA: The Standard and Carbon Fiber Infused both are PLA but the Carbon Fiber Infused has small traces or Carbon Fiber in the plastic which is supposed to increase tensile strength. It’s more expensive, I can’t say for certain if it’s that much stronger but it does seem to hold up very well in other prints I’ve used it in. Here are some videos showing the use for the Hex Adapters and bigger tires:Toyota in action with ECX Temper Wheels/Tires: https://youtu.be/KiAUTNwWho8Jimny with Axial c10 wheels/tires on the rocks, please note the Jimny has a body lift in order to fit the larger Wheels/Tires: https://youtu.be/H08BaV8Z584Comparing stock vs. mod with the hex adapters on the Jimny and various upgrades on both: https://youtu.be/0jXIhTqNHhc NOTES: These items can warp and melt in hot sun or left in hot places like a car or attic, use caution! Please see my other items! Roof Racks, Lift Kits, Hex adapters, wheel extenders, scale accessories...and more! Thanks for looking!

Price: 6.25 USD

Location: Holly Springs, North Carolina

End Time: 2023-12-22T21:08:00.000Z

Shipping Cost: N/A USD