KZYEE KM05 Powerscan Circuit Tester Electrical Power 12V/24V Probe Diagnostic

Description: The KZYEE KM05 kit is the most revolutionary circuit tester to date, which works off of 12-24 Volt sources, featuring DC Voltage, AC Voltage, Resistance, and Diode, Activate and Test the Electronic Component , users can long-press the mode button to switch between Waveform Display Mode and Digital Display Mode. Theis indeed the ultimate in power and affordability, allowing users to check circuitry in one single step. An absolute must for every technician who is looking for a fast and accurate solution to electrical systems diagnostic.TIPS:1.KM05 is ONLY for 12-24V vehicle battery electrical systems, and should NOT be used to test 110/220V household electric appliances; or, it will be damaged.2. The LED and LCD pull no more than 100 milliamps of current, therefore when using this device as a test light or multimeter, it is safe for computers and airbags.3.When powering-up components, you can increase the life of rocker switch in the tool if you first press the switch, and then contact the tip to the component. The arcing will take place at the tip instead of the metal contacts of the rocker switch.Product function introduction 1) DC voltage test function, up to 60V 2) AC test function, can capture AC maximum and minimum values, test range 0~60V, and at the same time can display the AC signal waveform, frequency. (3) Resistance test function, test range 0 ~ 100KΩ, when the test resistance is less than 100Ω buzzer alarm. (4) Diode test function, can detect the diode forward voltage, in the diode function long press the up key can realize the mute function. 5) Import positive or negative battery current to the tip, used to activate and test the electronic component function. (Equivalent to adding a fuse wire) 6) This product also features illumination, sharp detection tip, long enough power cord and extension cord, cigarette lighter connector and clip. Product SpecificationsDC voltage ：0~60V AC Voltage : 0~60V /0~10KHz Resistance: 0~100KΩ Diode: 0~3V Positive or negative current: 8AInstrument Introduction① Probe - Contacts the circuit or component under test. ② Front light - Illuminates dark work area or at night. ③ Red/Green Polarity Indicator - Identifies positive, negative, or open circuit. The red indicator lights when the probe contacts a positive circuit. When the probe contacts a negative circuit, the green indicator light is on. ④ LCD Display - Displays test results. ⑤ Power Switch - Allows you to draw positive or negative battery current to the tip to activate and test electronic component functions. ⑥ Mode Button - Selects the mode of operation: AC Voltage, DC Voltage, Resistance, Diode. ⑦ Auxiliary Ground Wire - Serves as an auxiliary ground wire for testing. ⑧ Battery Clamp Cable - Connects to the battery.Fuel Injection:Voltage: 0~180V, Time: 0~25msFeatures:DC Voltage ModeDC mode is for testing DC (direct current) voltages. Voltage testing is as easy as contacting the probe tip to a circuit and reading the display. DC Mode is the mode that the KM05 can supply battery power or ground by pressing the rocker switch.AC Voltage ModeThe auxiliary ground wire is connected to one end of the circuit under test, and the probe contacts the other end of the test circuit. The LCD will display the max and mini voltage value, and display the signal waveform in real-time. You can adjust the sampling frequency by pressing the Up/Down Button.Resistance Testing ModeThe probe contacts one end of the measured resistance, and the auxiliary ground lead is connected to the other end of the measured resistance. The LCD will display the resistance between the tip and auxiliary ground lead. When resistance value is less than 30Ω, the instrument buzzer will alarm and the green LED will light. This function can be used as continuity test.Diode Testing ModeContact the probe tip to diode positive terminal, connect the auxiliary ground lead to the diode negative terminal, the screen will display the forward voltage drop, which indicates forward bias. If swapping the probe tip with auxiliary ground lead, the screen will not display voltage, which indicates reverse bias. It also displays the max and mini values during measurement.Manual Activation Component For example, to activate a light bulbproceed as follows: 1.Press the power switch forward to activate the light bulb. 2.Touch the probe to the positive terminalof the light bulb. 3.Connect the negative auxiliary clamp PaymentDelivery detailsTerms of salesAbout usContact usPaymentWe accept all common forms of payment such as Credit cards、Debit card、Google Pay ect. Payment should be made within 7 days after bidding ends.Otherwise a Unpaid Item case will be opened to you.Please include your special requests in eBay note if there is any.Delivery detailsOrder will be shipped within 1 business day after payment confirmed.We have warehouse in USA, From our US warehouse via UPS or USPS shipping. Delivery time varies from 2 to 5 business days.We will ship according to your eBay address. Please make sure it is correct and include phone number for delivery.If you do not receive your order in the estimated time, please contact us, we would do our best to serve you solve the problem. Please include your special requests in eBay note if there is any.Terms of salesReturn PolicyPlease return the item within 60 days after receiving if you are not happy with your purchasing.All returns are expected to be in original conditions, please email us first for return address and instructions. We are authorize distributor, our all items are 100% original and Our devices have warranty, 5 Year free repair for the devices. Please contact us firstly when you need warranty service.In case an item arrives faulty, please contact us as soon as possible and keep it unused.We will instruct you on how to return and get refund or replacement.If the item has been used, we have the right to decline your claim.Items should be returned on buyers' cost for repair or replacement.About usWho We Are? We are specialized dealer of On-Board Car Diagnostic tools and automotive electronics for more than 15 years. We are authorized first class distributor of Launch, Foxwell, Autek, Ancel, Innova, Autophix, Thinkcar, Kzyee brands, and more brands will be show in our store in near future. What Do We Have? We have office and warehouse in US to ensure fast shipment and after-sale service. We have more than 1000 employees devoting to customer satisfaction. Contact us 1:If youhave any problem about the goods, please contact us before leaving Neutral/Negative feedback.We promise to help you solve it asap, and make you feel satisfactory absolutely. 2: our business time:M-F: 9:30AM - 18:00PM BST (Beijing Standard Time) 3:Please leave us Positive Feedback and 5-stars★★★★★after you received our package you are satisfied with it. as you know, every seller works hard for the positive feedback. We will do the same as soon as we can too. On Sep 27, 2024 at 04:17:41 PDT, seller added the following information:

Price: 57.99 USD

Location: Monroe Township, New Jersey

End Time: 2024-10-26T16:57:36.000Z

Shipping Cost: 0 USD