Meyer Sound PA System - 12 UPA-1C Speakers/2 USW Subs, Power Amps & Processors

Description: Meyer Sound UPA/USW Soundsystem 12x Meyer Sound UPA-1A (Speakers)2x Meyer Sound USW (Subwoofers)2x 10 U Amp Racks (each includes):1x Meyer Sound M-1A1x Meyer Sound B-2A1x Chevin Q-61x Bryston 7B Meyer Sound UPA-1A (12x Total):Above the rest sound quality for concert, venue or theater quality sound. Built like tanks, if maintained you will never need another set of speakers this lifetime. Meyer Sound UPA-1A is a powerful loudspeaker. It delivers high sound pressure levels with extremely low distortion, for maximum intelligibility and fidelity. Meyer UPA-1A is a bi-amplified loudspeaker. It consists of a proprietary 12-inch low-frequency cone driver in a vented enclosure with a 90-degree high-frequency horn and driver. The rugged multiple-ply hardwood cabinet enclosure is fitted with handles and, optionally, aircraft-style rigging pan fittings. The UPA-1A specifications meet the most demanding professional needs. Even after extended use, the performance of UPA-1A remains uncompromised. Dimensions per speaker: 15″ W x 22″ H x 15″ D Weight per speaker: 67 lbs Dimensions with Case: 28x28x35 Weight with Case: 205 lbs Meyer Sound USW (2x Total): The compact, high-power USW-1 extends the frequency range and power bandwidth of Meyer Sound reinforcement systems to 40Hz. Accurate and rugged,the subwoofer consists of two 15-inch cone drivers capable of long excursion with extremely low distortion, housed in a heavily braced five cubic foot vented enclosure of multiple-ply hardwood.Fitted with handles, the roadworthy cabinet has a durable, textured finish and,optionally, aircraft-style rigging pan fit-tings for ease of installation.UltraSeries™SubwooferThe USW-1 requires a professional qual-ity power amplifier capable of delivering up to 400 watts into 4 ohms (this normally corresponds to a 250 watt/8 ohm rating),with a signal voltage gain of 20 dB (mini-mum) to 30 dB (maximum). Meyer Sound M-1A (2x Total): Optimized for the UM-lA and UPA-IA loudspeaker and pre-aligned at the factory, the M-lA contains an electronic processor with frequency response and phase response alignment circuitry, and Meyer Sound’s exclusive SpeakerSense™ driver protection circuitry, incorporating both peak and RMS signal limiting. A single-channel device operating at line level, the M-lA is the final component in the signal chain before the amplifier. SpeakerSense driver protection circuitry protects the UM-lA loudspeaker components from damage due to overheating under high power conditions. This unique circuit continuously monitors the power applied to the UM-lA drivers, and individually limits the high-frequency and low-frequency processor outputs when the safe operating limits of the drivers are exceeded. Until the onset of overload, the SpeakerSense circuitry has no effect on the signal. Also provided is a switch-selectable Safeguard function, which widens the safety margin of the system and is intended to be used when extended periods of overload are anticipated. The Safeguard switch and other setup controls are located behind a cover plate on the M-lA front panel, providing a means of securing the system installer’s presets. Meyer Sound B-2A (2x Total): The Meyer Sound B-2A is an active signal processor designed for use with Meyer Sound 650-R2 and USW-1 subwoofers. It occupies a single 1¾-inch rack space. The B-2A also incorporates the Meyer Sound Bass Extender, a switch selectable effects circuit which adds a subjective impression of fullness to the subwoofer sound without affecting system headroom or frequency response. Chevin Q-6 (2x Total): The classic Chevin A-Series amplifier is built in a steel and aluminium housing incorporating lateral Mosfets and the legendary Chevin Power Supply, this combination produces the traditional Chevin sound. Features :High efficiency power supply designLightweight and compactExcellent sonic qualityComprehensive protection system independent for each channelAnti-surge AC soft-start circuit with automatic mute on power upBryston 7B (2x Total): Solid-state monoblock power amplifier. Class of operation: AB2. Balanced and unbalanced inputs. Rated power output: 500W continuous sine wave power into 8 ohms (27dBW), 800W continuous sine wave power into 4 ohms (26dBW). Distortion: less than 0.01%, 20Hz-20kHz at 500W, IM or THD. Rated slew rate: greater than 60V/µs, parallel mode, 120V/µs, series mode. Sensitivity: 1V for full output. Rated input impedance: 10k ohms. Rated full-power bandwidth: 1Hz-100kHz. Damping factor: over 300 at 20Hz, ref. 8 ohms 600w @ 8 ohms single channel 900w @ 4 ohms *** Soundsystem includes 4 pin cables ***

Price: 7500 USD

Location: Kapaa, Hawaii

End Time: 2024-08-10T23:28:28.000Z

Shipping Cost: N/A USD