Morningstar GFPD-150V Ground Fault Protection Device 150 Volt

Description: Morningstar CorporationGround Fault Protection Device - 150VGFPD-150V Morningstar’s Ground Fault Protection Device (GFPD) Family, Models GFPD-150V and GFPD-600V, increases safety and design flexibility in off-grid and on-grid photovoltaic (PV) systems. Ground fault protection is used in electrical systems to prevent current from following any unintended paths during a ground fault. It is critical to detect any stray current and to interrupt (break) the circuit until safe operation can be restored. A current imbalance between the primary +/- PV conductors entering the charger/inverter may indicate a ground fault condition. Morningstar’s GFPD will detect this condition and break the circuit on both the positive and negative legs. Disconnecting both poles ensures interruption of the ground fault current. The GFPD enables system design flexibility. Morningstar designed the GFPD to be easily paired with the TriStar MPPT™ charge controller during on-site installation. Additionally, the GFPD will work just as well in systems with mixed vendor components. Morningstar’s GFPD is a superior solution to ground fault protection. With its custom molded equipment ground terminals, installation and troubleshooting are simplified. Furthermore, the GFPD breaks the entire PV array circuit during a fault condition and requires no special labeling on the battery enclosure. Features:Powered via the PV system’s battery bank - and supports a wide range of voltages (12V, 24V, 36V, 48 Vdc nominal systems)Breaks the connection to the PV array during a fault conditionLeaves the battery and DC loads grounded under all conditionsEliminates the danger of an ungrounded battery and therefore requires no special labeling at the battery location (per NEC)Features audible and visual indications/alarmsPerforms precise current measurement with no fusesBuilt to support both single controller and multiple controllers systemsCertifications: CE, RoHS and REACH Compliant; UL Listed; (NEC) 690.5 Compliant for use as a GFPD deviceCompatible with:TriStar MPPT 600VTriStar MPPTProStar MPPTSpecifications and Certifications by ModelModel GFPD-150V:Maximum Solar Voltage (Voc): 150 voltsMaximum Solar Current (Isc): 85ANominal Battery Voltage: 12, 24, 36 or 48 VdcSupply Voltage Range: 10-72 VdcSelf Consumption: <0.5WGround Fault Threshold Current: 300 mA +/- 10%Number of Poles: 2Trip Method: RelayOutput Trip Signal: 12VOperating Temperature Range: -40 C to +50CWarranty: 5 YearsCE and RoHS compliant: YesUL1741 and CSA C22.2 No. 107.1-01 Listed: YesUL-489 Listed: YesUL-1077 Listed: NoFCC Class B Part 15 Compliant: YesU.S. National Electrical Code (NEC) 690.5 Compliant for use as a GFPD device: YesManufactured in a Certified ISO 9001 Facility: YesModel GFPD-600VMaximum Solar Voltage (Voc): 600 voltsMaximum Solar Current (Isc): 50ANominal Battery Voltage: 12, 24, 36 or 48 VdcSupply Voltage Range: 10-72 VdcSelf Consumption: <0.5WGround Fault Threshold Current: 300 mA +/- 10%Number of Poles: 2Trip Method: RelayOutput Trip Signal: 12VOperating Temperature Range: -40 C to +60CWarranty: 5 YearsCE and RoHS compliant: YesUL1741 and CSA C22.2 No. 107.1-01 Listed: YesUL-489 Listed: NoUL-1077 Listed: YesFCC Class B Part 15 Compliant: YesU.S. National Electrical Code (NEC) 690.5 Compliant for use as a GFPD device: YesManufactured in a Certified ISO 9001 Facility: Yes

Price: 218 USD

Location: Roanoke, Virginia

End Time: 2023-11-12T20:04:41.000Z

Shipping Cost: N/A USD