MPPT 60A 80A 100A Solar Charge Controller 12V 24V 36V 48V DC Battery Regulator

Description: 60A-White 60A MPPT Charge Controller Advantages: MPPT solar charge controller could optimize for long battery life and improved battery system performance charging process. Self-diagnostics and electronic error protections prevent damage when installation errors or system faults occur. This charger also features multifunctional LCD with communication ports for remote battery temperature and voltage measurement. 60A MPPT Solar Charge Controller Features: 60A MPPT Solar Charge Controller Features: Intelligent Maximum Power Point Tracking technology increases efficiency 25-30% 3-Stage Charging: Constant current(MPPT) Absorption stage (Constant voltage) ; Float stage Compatible for PV systemsin 12V/24/36V/48V Max efficiency ≥97%, PV utilization ≥99% Integrated intelligent slot compatible with RS485 Communication. Support wide range of lead-acid batteries including flooded,AGM,GEL,LEAD,Lithiumion, User-Defined batteries. 60A MPPT Solar Charge Controller Warm Tips: 1;Solar controller link order: first connect to battery; then connect to PV array; finally connect to load appliance. 2; Don't connect inverter, wind, alternator charger into the charge controller! Please connect the solar controller to the battery. 3;If solar PV input voltage lower 3V or lower than batteries’ voltage. It may be appears to have been discontinued. 4; Parameter Setting:Floating voltage > Low voltage reconnect > Low voltage discharge. 5;When controller makes buzzing because the controller dissipate heat. It will be stop when temperature return to normal. 6;Don't let the positive (+) and negative (-) terminals of the battery touch each other. Limited Current Protection 60A System Voltage 12V / 24V / 36V / 48V auto 3 Charging Mode Constand Current (mppt), Equalizing Charge, Floating Charge Max PV Input Voltage 150VDC Max PV Input Power 780W/12VDC;1560W/24VDC;2340W/36VDC;3120W/48VDC 60A-Silver FEATURE Charging 3-stage: constant current(MPPT), constant voltage(Absorption Voltage), floating charge Selectable battery type Vented / Sealed / Gel / NiCd / Lithium battery (default is Sealed) (defined voltage for other battery by user) Soft start time ≤1S, Dynamic response and recovery time 100us Max efficiency ≥98.1%, PV utilization ≥99% In order to reduce the cost of electricity caused by high current, PV and battery each have two terminals MULTIPLE ELECTRONIC PROTECTIONS Short-circuting Reverse-current Overcharging Overload Over-discharging Reverse polarity protection Maximum PV Input Power Ensure that the solar input voltage exceeds 3v or is higher than the battery voltage. 12 Volt Battery Systems: Maximum PV input power 720 watts, recommended solar input voltage range 20 - 80 volts DC. 24 Volt Battery Systems: Maximum PV input power 1440 watts, recommended PV input voltage range 37 - 105 VDC 36 volt battery system: 2100 watt maximum PV input, recommended PV input voltage range 50 - 150 volts DC 48 volt battery system: 2800 watt maximum PV input, recommended PV input voltage range 72 - 150 volts DC Installation Procedure Installation Procedure Install the switch between the controller and the battery. Install a switch between the controller and the PV module. Check that the "+" and "-" of the PV module and the "+" and "-" of the battery are correctly connected. Turn on the battery switch first, then turn on the PV switch. LCD display ESC: Exit the setting without saving the data. UP: Scroll down, adjust the parameter by increasing the value. DOWN: Scroll up, adjust the parameter by decreasing the value. ENTER: Short press to move to the next setting page, long press to exit the setting and save the data. Display Code Meaning Display Code Meaning EQU: Load voltage compensation BST: Pulse charging voltage FLD: Load voltage hold LDV: Over-discharge voltage LRV: Over-discharge recovery voltage BST - r: Pulse charge recovery voltage Battery type: FLD/SEL/Gel/Lithium/Use Warning and Caution 1. the battery voltage must be higher than 12v for the controller to start. 2. make sure that the solar input voltage exceeds 3v or the battery voltage. 3. hold the wiring correctly and do not change the wiring. 3. hold the wiring correctly and do not change the wiring. pay attention to the order of the terminal wiring. 4. if it is a lead acid battery, if it is not professional, do not set any parameter, because in addition to the lithium battery, the controller also works well in the standard state. 5. do not connect solar inverters / generators / wind turbines to the controller. 6. Install the controller indoors to prevent the components from entering the water. 7.Maximum PV input voltage (voc): 180 V dc, the controller cannot work for a long time under this voltage, which will damage the controller. 8. Disconnect the battery and reconnect to save the configuration. 60A-Blue 60A MPPT Solar Charge Controller 12V/24V/36V/48V Auto, Solar Charger Regulator Intelligent Regulator Charge Controller Support Wide Range of Batterie 60A MPPT Charge Controller Advantages: MPPT solar charge controller is an advanced solar charger with maximum power point tracking.Applying intelligent MPPT algorithm allows solar charge controller to extract maximum power from solar arrays by finding the maximum power point of the array. MPPT solar charge controller could optimize for long battery life and improved battery system performance charging process. Self-diagnostics and electronic error protections prevent damage when installation errors or system faults occur. This charger also features multifunctional LCD with communication ports for remote battery temperature and voltage measurement. 60 Amp MPPT Solar Charge Controller 12V/24V/36V/48V Auto 60A MPPT Solar Charge Controller Features: Intelligent Maximum Power Point Tracking technology increases efficiency 25-30% 3-Stage Charging: Constant current(MPPT) Absorption stage (Constant voltage) ; Float stage Compatible for PV systemsin 12V/24/36V/48V Max efficiency ≥97%, PV utilization ≥99% Integrated intelligent slot compatible with RS485 Communication. Support wide range of lead-acid batteries including flooded,AGM,GEL,LEAD,Lithiumion, User-Defined batteries. 60A MPPT Solar Charge Controller Warm Tips: 1;Solar controller link order: first connect to battery; then connect to PV array; finally connect to load appliance. 2; Don't connect inverter, wind, alternator charger into the charge controller! Please connect the solar controller to the battery. 3;If solar PV input voltage lower 3V or lower than batteries’ voltage. It may be appears to have been discontinued. 4; Parameter Setting:Floating voltage > Low voltage reconnect > Low voltage discharge. 5;When controller makes buzzing because the controller dissipate heat. It will be stop when temperature return to normal. 6;Don't let the positive (+) and negative (-) terminals of the battery touch each other. 60A Solar Charge Controller Parameter Limited Current Protection 60A System Voltage 12V / 24V / 36V / 48V auto 3 Charging Mode Constand Current (mppt), Equalizing Charge, Floating Charge Max PV Input Power 780W/12VDC;1560W/24VDC;2340W/36VDC;3120W/48VDC Max PV Input Voltage 150VDC 80A AND 100A Features: 80A 100A MPPT solar charge controller· MPPT technology· 3-stage charging optimizes battery performance· Battery OVP、Battery LDV、Solar OVP、Overcharge、over-temperature、Reverse Polarity protection· Suitable for battery types such as sealed lead acid, vented gel and lithium battery, etc· Automatic battery voltage detection for 12V/24V/36V/48V· Easy to be mounted Item ICharger MPPT 8048 ICharger MPPT 10048 ChargingMode 3-stage:ConstantCurrent(MPPT),ConstantVoltage,Floating SystemVoltage 12/24/36/48/Auto MaxPVInputPower 1200W/12V;2400W/24V 3600W/36V;4800W/48V 1500W/12V;3000W/24V 4500W/36V;6000W/48V MaxPVInput Voltage 150Voc BatteryVoltageAutomaticRecognition 12VSystem(DC8.7V-DC15.5V),24VSystem(DC16V-DC31V) 36VSystem(DC33V-DC41V),48VSystem(DC42V-DC64V) Overcharging ProtectionVoltage 12VSystem(16V),24VSystem(32V)36VSystem(48V),48VSystem(64V) LimitedCurrent Protection 80A 100A MaxEfficiency ≥98.1% PVUtilization ≥99% AutoTemperature Compensation -3mV/2V/ºC ProtectionFunction TemperatureProtection 80℃ Fan-onTemperature >45℃ Fan-offTemperature <40℃ Properties Size(mm) 252*201*80.3 NetWeight(Kg) 2.28 2.49 Electromagnetic Compatibility AccordtoEN61000,EN55022,EN55024 Enclosure IP21 EnvironmentalTemperature -20℃~+55℃ StorageTemperature -40℃~+75℃ 80Amp 80A MPPT Solar Controller, Solar Charger Regulator 12V/24V/36V/48V Auto, Intelligent Regulator Charge Controller, Support Wide Range of Batteries 80A MPPT Solar Charge Controller Features: Intelligent Maximum Power Point Tracking technology increases efficiency 25-30% 3-Stage Charging: Constant current(MPPT);Absorption stage (Constant voltage) ; Float stage Compatible for PV systemsin 12V/24/36V/48V Max efficiency ≥98.1%, PV utilization ≥99% Integrated intelligent slot compatible with RS485/USB Communication. BTS:Battery temperature sensor automatically provides temperature compensation. Support wide range of lead-acid batteries including flooded,AGM,GEL,LEAD,Lithiumion, User-Defined batteries. Automatic battery voltage detection 80A MPPT Solar Charge Controller: This solar charge controller is an advanced solar charger with maximum power point tracking.Applying intelligent MPPT algorithm, it allows solar charge controller to extract maximum power from solar arrays by finding the maximum power point of the array. The MPPT battery charging process has been optimized for long battery life and improved system performance. Self-diagnostics and electronic error protections prevent damage when installation errors or system faults occur. This charger also features multifunctional LCD with communication ports for remote battery temperature and voltage measurement. 80A MPPT Solar Controller Parallel Function: Warm Tips: 1;Solar controller link order: first connect to battery; then connect to PV array; finally connect to load appliance. 2; Don't connect inverter, wind, alternator charger into the charge controller! Please connect the solar controller to the battery. 3;If solar PV input voltage lower 3V or lower than batteries’ voltage. It may be appears to have been discontinued. 4; Parameter Setting:Floating voltage > Low voltage reconnect > Low voltage discharge. 5;When controller makes buzzing because the controller dissipate heat. It will be stop when temperature return to normal. 6;Don't let the positive (+) and negative (-) terminals of the battery touch each other. 80A MPPT Solar Charge Controller Package List ●Solar charge controller x 1 ●User manual x 1 ●USB cable x 1 Battery temperature sensor cable x 1

Price: 79.99 USD

Location: Chino, CA

End Time: 2024-09-25T08:32:08.000Z

Shipping Cost: 0 USD