Description: Low Input Voltage Solar Panel Controller for lead acid and lithuim batteries: Made in USA The D385 combines the following design elements: 1. Low voltage, high current boost converter typically getting over 94% conversion efficiency. The D385 is so efficient that it doesn’t need a heatsink. 2. Precise MPP tracking. This is critical in a low voltage application because the “sweet spot” of peak MPP output is very small. A typical “12V” standard panel with 36 solar cells will produce nearly constant power from 16.5V to 18.5V, a target almost 2V wide. We can reliably set the MPP to 25mV accuracy. 3. Intelligent multi-chemistry Lithium or Lead acid support. There’s a jumper on the PCB to set which type of battery you’re using. 4. Small Low profile design. The D385 was designed to fit into small J-boxes and the back side of the PCB is flat. You can drop the D385 into a small junction box and epoxy it in place or over mold it. 5. Low Cost. It’s a highly integrated design, we developed the controller IC first, then wrapped a very simple set of power components around it. · Solar controller for charging for lead-acid or lithium batteries · No other complex controllers / regulators · Unit goes in float mode when battery is fully charged · Has MPPT (Max power point Tracking) for overall efficiency up to 96% · Just connect 4 Solar Cells Or 2-2.5 volt above 2 amps input and connect to 12 volt battery. That simple please mention on order 4 cell controller @ 20watts, 6 cell controller @ 30 watts or 8 cell controller @ 50 watts MADE IN USA Mppt solar charge controller 12v. Condition is "New". Shipped with USPS Priority Mail from the United States of America
Price: 19.5 USD
Location: Chelsea, Michigan
End Time: 2024-08-30T22:03:27.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Current Output: 10 A or Less
System Configuration: Off-Grid
Solar Technology: Solar Charging Technology
Maximum Input Power: 3 watts
Power Source: Solar
Maximum Input Voltage: 10 V or Less
Inverter Technology: Hybrid
Wattage: 20 watts
Brand: DEHD Energy
Type: Solar Charge Controller
Current Type: DC
Voltage: 11-15 V
Model: D385
Recommended Environment: Indoor/Outdoor
Features: Automatic Voltage Detection, Maintenance Free, Portable, Rechargeable Battery Backup, Smart Module
Charging Mode: MPPT (Maximum Power Point Tracking)
Country/Region of Manufacture: United States
Application: Agriculture/Farming, Aquaculture, Automotive, Back-up Power, Camping/Hiking, Commercial, Electronics, Home/Garden, Irrigation, Marine, Municipal, Pool, Recreational Vehicle (RV), Shed
Power: 20 watts
Protection Properties: Overcharge Protection, Reverse Polarity Protection, Spike Protection, Thermal Protection
