Ohlins RXF36 M.2 Air 29" Fork, 44mm, 150mm

Description: Selling a Ohlins RXF 36 fork. This fork is used but in excellent working condition. 150mm travel / 44mm offset Boost 110x15 spacing29er model Steerer tube is cut to approx 203mm and star nut is installed. Travel can be adjusted from 140-180mm by swapping air springs Note that this fork is air spring only per Ohlins. Normally the RXF can be converted between Air/Coil but there was a batch or two built that were air spring only due to part shortages. If you want to convert to coil this is not the fork for you. Additional info from the Ohlins website The race proven TTX 18 dampening from the DH38 Race Fork has been reworked to give optimal traction and control on trails and Enduro race courses. The TTX 18 cartridge kit featuring trail-optimized 18 mm piston for improved small bump sensitivity. With increased damping pressure bandwidth the damping valve response and sensitivity has improved. The adjustment range specifically for trail to Enduro race use with 15 clicks of low speed compression and low speed rebound. For high speed compression you get 3 clicks plus a climb mode setting. Retuned twin piston three chamber air spring system allowing total air spring tuning from the initial movement through to the bottom out. Improved tire clearance, the chassis will take up to a whopping 29×2.8 and 27.5+ x 3.2. There are many technical improvements in the fork but we did not stop there, the design has also been updated and matches what you see on the race courses.Specs TTX-technology Air: travel 140-180 mm Independent spring system Independent damper system Retuned air spring system 36 mm upper tube diameter Offset 44 mm Compatible maximum tire sizes 29x2.8 / 27.5+ x 3.2 Prepared for mudguard Race proven setting bank Overall improvements for reducing friction

Price: 800 USD

Location: Gainesville, Georgia

End Time: 2024-11-07T17:59:15.000Z

Shipping Cost: 0 USD