Renogy 20A Voyager PWM Waterproof Solar Charge Controller 12V/24V W/ LCD Display

Description: The Voyager 20A is a class leading 20-amp charge controller with an IP67 rating. It is perfect for outdoor use, and can withstand water spray, rain, and condensation. Equipped with advanced PWM technology, it supports both 12V and 24V off-grid applications, and is compatible with 4 different battery types, including Lithium Iron Phosphate. The Voyager 20A also ensures your system's longevity with solar panel, battery, and controller protections.Note: Please set the voltage manually to charge lithium batteries.Efficient, Stable, and Safe ChargingUtilizing smart PWM technology, the Voyager provides 4-stage charging (Bulk, Absorption, Float and Equalization) in order to protect the battery. It also provides multiple battery, controller, and PV electronic protections to ensure charging and usage safety.Compact and lightweightThe Renogy Voyager PWM Waterproof Controller is compact and lightweight, making it perfect for applications with limited space. With a weight of only 0.55lb, a height of 3.84 inches and a width of 6.08 inches, this controller is ready to be installed in small spaces.Common Positive GroundThe Voyager PWM Waterproof Controller is a common positive ground charge controller, beneficial in ensuring charging safety.Temperature Monitor and CompensationFitted with a Remote Temperature Sensor Port, the Voyager can measure battery temperature in real-time and use this data for very accurate temperature compensation, assuring stable and constant charging.Extremely Low Self-ConsumptionIn a 12V system, the Voyager PWM Waterproof Controller only needs 0.22w/h or 1.92kmh/365days. Therefore, consuming extremely low levels of energy while working to charge your battery.Automatic Voltage DetectionThe Voyager PWM Waterproof Controller supports both 12V and 24V systems and can automatically identify system voltage once connected to a Gel, AGM, Flooded battery bank. Please set the voltage manually to charge lithium batteries.NOTEFor users using PWM controller in their solar system, we highly recommend you to connect the solar panels in parallel since it will maintain the PV output voltage under which the controller will work in high efficiency.Never install the controller in a sealed enclosure with flooded batteries as gas can accumulate and there is a risk of explosion.The solar controller should be installed as near the battery as possible to avoid efficiency loss.Incorrect battery type setting on the controller may damage your battery. The system auto-recognition is only adapted to Gel, AGM, and Flooded batteries so when using the Voyager to charge a lithium battery bank, please manually set the system voltage otherwise the over-discharged lithium battery will not be activated.To maintain best controller performance, it is recommended to avoid any damage or wear wire going into the controller and make sure all terminals are tighten, inspect any loose, broken, or burnt up connections, and occasionally clean the case using a damp cloth.On Jul 25, 2024 at 01:34:13 PDT, seller added the following information:

Price: 49.99 USD

Location: Ontario, California

End Time: 2024-09-25T05:36:18.000Z

Shipping Cost: 0 USD