Shoulder straps for a combat belt from the Russian company SSO/SPOSN (Olive)

Description: Shoulder straps for the belt-shoulder system, designed to be worn over lightweight tiles or full body armor. Due to its design features, this model allows for wearing them in parallel with a backpack. • The product consists of a right and left strap, from which “tails” extend down for attachment to equipment, as well as from a back platform from which four more “tails” extend.• Six attachment points (two in front and four in back) to tactical belts or pouches.• The straps can be attached either to special fastening points on the belt, or simply by threading them into the Molle cells or by passing the belt through them.• The left and right straps are a sandwich. The outer fabric is Cordura, or Cordon (depending on the color), followed by 2 mm thick isolon and a rigid mesh backing. The width of the straps is 9 cm. For attaching bags for radio stations or IPP, seven belt strips 2 Molle cells wide are sewn to each of them. Above both lower belt straps with Molle cells there are metal fittings for attaching carabiners, so that gloves or a belay harness can be placed on them if necessary.• The left and right straps are connected to each other by a removable chest strap. It is fastened with fastex and is adjustable in width using double slots. The chest strap evens out the load across the entire width of the strap and allows the straps not to move apart.• The dorsal platform consists of three horizontal strips, equally spaced, with 5 Molle cells on each. The belts are sewn on top of a rigid mesh.• A carrying handle is sewn into the upper part of the back platform. It provides that if it is necessary to evacuate a wounded soldier from the battlefield, a carbine from an evacuation sling will be attached to it.• The straps and back platform are edged with tape.• Molle-mount backpacks, food bags and hydraulic covers attach directly to the back platform. The straps of classic backpacks are fixed to the straps in the shoulder area with a clasp consisting of two belt strips with a soft and hard part of linden sewn onto them, respectively. Fixing the backpack straps allows you to use only the chest strap from the shoulder straps, without fastening the chest strap from the backpack over it.• Universal size. Adjusting the length of the straps allows you to adjust them to any height of the operator (from 150 to 210 cm).• Metal wing buckles are installed at the points where the belt tails are attached to the straps or the back platform. A belt is threaded through them to secure it, and they also allow you to quickly adjust the straps to suit your height. • Weight of 500D fabric shoulder straps ~ 500g.

Price: 50 USD

Location: Yerevan

End Time: 2024-11-21T09:44:45.000Z

Shipping Cost: 15 USD