Shurtape CP-631 Colored Masking Tape: 1 in. x 60 yds. (Red)

Description: Product HighlightsEconomical general purpose tape for use in packaging, bundling, holding, binding, splicing, labeling, color coding, banding, decorating and identification. The tape is flexible and is resistant to water, oil, and solvents; and provides excellent adhesion and release from a variety of substrates. Shurtape CP-631 has multiple uses for home, school, and industry. This colored masking tape has a crepe paper backing and is coated with a thermoplastic synthetic rubber adhesive.NOTE: Shurtape phased out their CP-632 masking tape product and replaced it with their CP-631 product. The specifications for both tapes are very close and CP-631's specification numbers are now displayed for this product. Made in the U.S.Tape rolls are typically cut to standard tape industry metric-cut sizes - or approx 5% narrower than the nominal size (i.e. 24mm per 1-inch of nominal width ordered).Adhesive: synthetic rubber. Carrier/Backing: crepe paper. Thickness: 4.9 mils (carrier, adhesive). Adhesion: 34 ounces per inch (to stainless steel test panel)Tensile Strength: 20 pounds per inch (longitudinal). Service/Operating Temperature: 60°F to 150°F. Elongation: 9%. Standards Met: ASTM D 6123/D 6123M-97 (2012), Type I; meets Consumer Product Safety Commission requirements through conformance with ASTM D-4236. Core: 3 inch diameter Shurtape CP-631 Colored Masking Tape is an economical general purpose tape for use in packaging, bundling, holding, binding, splicing, labeling, color coding, banding, decorating and identification. The tape is flexible and is resistant to water, oil, and solvents; and provides excellent adhesion and release from a variety of substrates. Shurtape CP 631 has multiple uses for home, school, and industry. This colored masking tape has a crepe paper backing and is coated with a thermoplastic synthetic rubber adhesive. Please note Shurtape phased out their CP-632 masking tape product and replaced it with their CP-631 product. The specifications for both tapes are very close and CP-631's specification numbers are now displayed for this product. Made in the U.S. NOTES: As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Technical Information- Core: 3 inch diameter - Backing/Carrier: crepe paper - Adhesive: synthetic rubber - Thickness: 4.9 mils (carrier, adhesive) - Adhesion: 34 ounces per inch (to stainless steel test panel) - Tensile Strength: 20 pounds per inch (longitudinal) - Service/Operating Temperature: 60F to 150F - Elongation: 9 %

Price: 8.21 USD

Location: Fairless Hills, Pennsylvania

End Time: 2024-02-26T01:25:21.000Z

Shipping Cost: N/A USD