TARAMPS Amplifier 4 Channel TS 400x4 Class D Full Range Car Audio 2 Ohms 400W

Description: TS 400x4The TS 400×4 is multichannel, with 4 channels of 100 Watts RMS, with a maximum power of 400 Watts RMS and with an impedance of 2 ohms. The TS 400×4 is FULL RANGE playing all frequencies in the right measure for you. It has thermal and short-circuit protection, in addition to the indicative LED and crossover.Highest PerfomanceAmplifier module from Taramps was developed with the highest performance for the most varied types of automotive sound systems.Functions and InputsINPUT Inputs of signals to be amplified. LEVEL It sets the amplifier input sensitivity, which allows an optimal adjustment to the output signals levels. CROSSOVER Set the operating mode of amplifier.Output and Power Supply ConnectorOUTPUT To connect the speakers. Follow the polarity and the minimum impedance recommended. POWER The connector terminal (+) must be connected to the battery's positive pole with a 4mm² (minimum) wire gauge. The connector terminal (-) must be properly connect to the battery's negative pole with a same wire gauge.PerformanceSubwooferWoofer6”x9” Speaker6” Speaker2 - Way SpeakersPhenolic DriverTitanium DriverSuper Tweeter Low Mid HighTechnical FeaturesOperation ClassClass DNumber of Channels04Maximum Power@ 13,8 VDC - 2 OHMS - 400 W RMS (4 x 100W RMS)@ 13,8 VDC - 4 OHMS - 252 W RMS (4 x 63W RMS)Bridged @ 13,8 VDC - 4 OHMS - 400W RMS (2 x 200W RMS)INPUT SENSITIVITY200mV (Vol = max.)Frequency Response(Full Range): 18 Hz to 30 kHz (-1dB)Crossover High Pass(HPF)90 Hz (-12dB/8th)Crossover Low Pass(LPF)90 Hz (-12dB/8th)Protection SystemThermal and Output ShortMaximum Music Consumption@13,8VDC: 16.5AMaximum Consumption in Sinusoidal Signal@13,8VDC: 33ADimensions(H X W X D)5.43" x 1.93" x 4.76"Weight1.32lb

Price: 79.99 USD

Location: Boca Raton, Florida

End Time: 2024-09-27T19:21:00.000Z

Shipping Cost: 0 USD