Taramp's DS 1200x4 1200 Watts 4 Channels Car Amplifier 2 OHM

Description: The DS 1200x4 2-ohm amplifier module has been carefully designed to meet the needs of a wide range of automotive sound systems. With 1200 watts of power distributed across 4 channels of 300 watts RMS at 2 ohms, it also offers the possibility of bridge connection, providing 2 channels of 600 watts RMS at 4 ohms. It can be used to amplify subwoofers, woofers, mid-bass, mid-range, mid-high, and high frequencies.Additionally, it features traditional RCA inputs, gain adjustment, and fixed crossover (HPF, LPF, and FULL), characteristic of Taramps products. Due to its versatility, the DS1200 can be installed to amplify door and rear deck speakers in cars, trucks, pickups, SUVs, motorcycle advertising boxes, 2-way kits, 4-way kits, coaxial, triaxial, quadriaxial, 4-inch, 5-inch, 6-inch, 6x9-inch, 5x7-inch speakers, trio boxes, bob boxes, horn boxes, residential boxes, horn boxes, drivers, driver boxes, among others. Versatility, efficiency, and quality in a single product. Technical Specifications: * Operating Class: Class D.This indicates the construction type of an amplifier. Class D (also called digital) due to the PWM (Pulse Width Modulation) used in its operation allows for a small, efficient amplifier with reduced heating compared to other construction classes. * Number of Channels: 04.The number of channels for use in your project, with this specific model, you have the option of connecting 4, 3, and 2 channels. * Power @12.6V – 2 ohms, stereo: 4 x 300 watts RMS.The power at 12.6V is related to the operation of the vehicle/power source. * Power @12.6V – 4 ohms, bridge: 2 x 600 watts RMS.The power at 12.6V is related to the operation of the vehicle/power source. * Minimum Output Impedance Stereo: 2 ohms.The result of speaker association, where, for example, you can connect two 4-ohm speakers per channel for this result. * Minimum Output Impedance Bridge: 4 ohms.The result of speaker association, where, for example, you can connect two 8-ohm speakers per channel (bridge) or just one 4-ohm speaker for this result. * Minimum Input Sensitivity: 250mV.The lowest voltage needed for the amplifier’s maximum output, meaning you can achieve good results with minimal volume from the radio. * Frequency Response: (Full Range): 9Hz ~ 27kHz (-3dB).The frequency response allows you to identify the application of the amplifier, meaning if the speaker or any other transducer you are using falls within this range, you can use this product in your project. * Low Pass Crossover (LPF) Fixed: 90Hz.LPF or Low Pass Filter allows everything below this reference to be reproduced and everything above it to be filtered out. A common use of this function is to reduce the presence of voice in subwoofers. * High Pass Crossover (HPF) Fixed: 90Hz.HPF or High Pass Filter allows everything above this reference to be reproduced. A common use of this function is to reduce the presence of bass in door speakers, for example. * Power Supply Voltage: 9 to 16V.This indicates the operating range of the amplifier, with minimum and maximum voltages for its operation. Outside this specification, it will not turn on or will activate a protection mode. * Idle Consumption: 1.8A.This is the reference consumption of the amplifier when turned on without music. * Maximum Musical Consumption: @12.6VDC: 67.5A.This is the estimated consumption of the amplifier working at minimum impedance playing music at maximum volume. * Maximum Sine Wave Consumption: @12.6VDC: 135A.Reference for bench/laboratory tests under specific conditions with resistive load, fixed frequency, and stable power source. * Protection System: Thermal and Short Circuit on Output.This system exists to protect the amplifier's operation. It may be related to output when connections are below the minimum impedance, a short circuit in the installation, or even faulty speakers.This protection can also activate due to voltages outside the operating range or thermal protection due to excessive heating conditions. * Dimensions: Width 18.2cm x Height 5.2cm x Depth 28.1cm.Overall dimensions of the product. * Weight: 2.1kg.Gross weight of the amplifier. Package Contents:* 1 DS 1200x4 2-ohm amplifier module;* QR code for manual download;* 1 Taramps sticker.

Price: 159 USD

Location: Sâo Paulo, SP

End Time: 2024-09-15T18:06:10.000Z

Shipping Cost: 0 USD