TARAMPS TS 400X4 2ohms 4 Channel 400Watts Car Audio Amplifier

Description: DescriptionThe Taramps TS 400x4 2 ohm digital amplifier module was developed with the highest performance for the most varied types of automotive sound systems. It is a stereo multichannel, with 4 channels of 100 watts rms at 2 ohms, and allows for bridge connection, with 2 channels of 200 watts rms at 4 ohms, with a maximum power of 400 watts rms. The TS 400X4 is full range, and can be used with the most varied models of speakers, subwoofer, horn, tweeter, midrange, woofer, mid-bass and super tweeters. It has an integrated crossover (hpf, lpf, full) that configures the amplifier's operating mode. Gain adjustment that allows adjustment to the output signal levels of practically all models of CD/DVD players on the market. LED indicator, which shows that the amplifier is on. Due to its diversity, it can be installed to amplify speakers in doors and trunks of cars, trucks, pickups, SUVs, motorcycle speakers, 2-way kits, 4-way kits, coaxial, triaxial, quadriaxial, 4-inch, 5-inch, 6-inch, 6x9-inch, 5x7-inch, trio speakers, bob speakers, residential speakers, among others. All this and much more to improve your sound system, with the quality you deserve. Technical specifications: • Operating class: class d.This is the designation of an amplifier construction, class d (also called digital) due to the PWM (pulse width modulation) used in its operation, allows for a small, efficient amplifier with reduced heating compared to other construction classes. • Number of channels: 4.Number of channels for use in your project. With this specific model, you have the option of connecting with 4, 3 and 2 channels. • Power @13.8V – 2 ohms, stereo: 4 x 100w rms. The power, with a voltage of 13.8 volts, is related to the operation of the vehicle/power supply. • Power @13.8v – 4 ohms, bridge: 2 x 200w rms. The power, with a voltage of 13.8 volts, is related to the operation of the vehicle/power supply. • Minimum stereo output impedance: 2 ohms. Association with the speaker result, where, for example, we can connect two 4-ohm speakers per channel for this result. • Minimum bridge output impedance: 4 ohms. Association with the speaker result, where, for example, we can connect two 8-ohm speakers per channel (bridge) or just one 4-ohm speaker for this result. • Minimum RCA input sensitivity: 200mV. The lowest voltage required for maximum results with the amplifier, i.e., with low radio volume, we will already be able to obtain good results. • Frequency response: (full range): 18Hz to 30KHz (-3dB). With the frequency response, it is possible to identify the application of the amplifier, as well as the speaker or any other type of transducer that you are using is included within this response, meaning that we can use this product in your project. • Fixed low pass crossover (LPF): 90Hz. LPF or low pass filter (English term) means low pass filter, i.e., it allows everything that is below this reference to be reproduced and anything above this indication will not be used. A common use of this function is to reduce the presence of voice in subwoofers. • Fixed high pass crossover (HPF): 90Hz.Hpf or high pass filter (English term), means high pass filter, that is, it allows everything above this reference to be reproduced. The common use of this function is to reduce the presence of bass in door speakers, for example. • Power supply voltage: 8 to 16v.This is the indication of the amplifier's operation where it will have the minimum and maximum voltage for its operation; outside this specification, it will not turn on or activate a protection. • Consumption at rest: 0.8a.This is the reference for the amplifier's consumption when turned on and without music. • Maximum musical consumption: @13.8vdc: 16.5a.This is the estimated consumption of the amplifier working at minimum impedance, playing music at maximum volume. • Maximum consumption in sinusoidal signal: @13.8vdc: 33a.Reference for bench/laboratory tests under specific conditions with resistive load, fixed frequency and stable power supply. • Protection system: thermal and short circuit at the output.This system exists to protect the amplifier's operation. It may be related to the output, when we have connections below the minimum impedance, a short circuit in the installation or even speakers with problems.This protection may also occur due to voltages outside the operating range, or even thermal protection that occurs due to conditions in which the amplifier is overheating. We will reciprocate positive feedback for a successful transaction. If you are happy with our service, please leave us feedback. WARNING: Shipping: Shipment of the product in 1 to 4 business days, shipments are by UPS or Fedex, as soon as the contracted service picks up the product, the tracking number is given to you. Please do on ebay. If UPS or Fedex cannot find the buyer at home and the product is returned, we will not refund the shipping cost, we will deduct a 20% fee from the product value for store administrative costs. Stay tuned for tracking number updates not charge tracking number if you purchased on Friday night, Saturday and Sunday, we ship products during business hours. Please check your shipping address if it is correct on Ebay, we are not responsible for incorrect addresses, you are responsible for the address you write We are not responsible for the customs fees charged by your country, each country has its own law, please study the laws before purchase. Orders outside the United States For buyers located outside of the United States, additional fees and taxes may be collected at your destination in accordance with your country's rules. For more information, consult FEDEX and UPS carriers or CUSTOMS in your country before purchasing. WE ARE NOT RESPONSIBLE FOR CUSTOMS FEES CHARGED BY YOUR COUNTRY

Price: 76.99 USD

Location: sao paulo

End Time: 2024-10-29T03:45:52.000Z

Shipping Cost: 0 USD