Thompson Center Arms Encore ProHunter G2 Bellm Pliers and No 2 Sear Spring

Description: Whether you simply change springs to lighten the pull weight or do a complete trigger job on your Encore Pro Hunter Endeavor or G2, this pliers and No. 2 Sear Spring make the job simpler and more economical. Upgrade your TC with Bellm performance springs. The pliers alone are $19.95 retail, and a spring is $6.95 for a retail total $32.15 with shipping. A trip to the local gunsmith, PRICELESS. This kit includes: 1-BELLM Sear Spring Installation pliers, Custom Hand Forged Pliers make the most difficult part a breeze.1- #2 Sear spring for an approximate pull weight of 3# to 3 1/2#, ideal for general shooting If working on an Encore Pro Hunter Endeavor, don't forget to purchase our Bellm Heavy Duty Firing Pin Return Spring purchased Separate, also suggest our Bellm Speedlock Hammer Spring. Installation of the spring requires first removing the trigger guard pivot pin, the trigger guard and its return spring, then the smallest pin in the frame which is the trigger pivot pin. Before removing the trigger, note how the end of the spring is inserted through the hole in the trigger. (Do not confuse the trigger/sear spring with the spring and plunger installed in the trigger with an "E" clip.... this is just to keep the trigger in position. DO NOT remove it.) Remove the trigger. Next push out the next larger pin ONLY enough to allow the trigger/sear spring to drop out. Grasp the Bellm Custom trigger/sear spring by the coils so that the straight end of the spring is toward the bottom of the frame and pointed to the rear of the frame. Making sure the opposite end with the curved tip is pressing on the forward side of the sear (see photos in the springs section of the store here to see what this looks like), push the spring into position while tapping the sear pivot pin in. Another method is to capture the spring coils with a 3/32" pin punch (available in the Tools section of this store)and guiding the coils into position for the pivot pin to pass through as you tap it in. Reverse the process to reassemble the frame, but note that when installing the trigger guard pivot pin, you must depress the plunger in the trigger so the pivot pin can pass over it! You MUST ALWAYS make two safety function checks: 1) Make sure the hammer will not readily push off.2) When the frame is reassembled, make sure the hammer will rebound when your finger is removed from the trigger. You can perform the safety function checks above before reinstalling the trigger guard and its return spring. For more details regarding Encore & G2 triggers, get the Encore/G2 Trigger Job Instructions here on the online store. Note that pull weights will vary significantly from one frame to the next, especially if any polishing or other changes are made to the trigger, sear, or hammer. #2 spring for a pull weight of approx. 3 to 3 1/2 pounds recommended for general shooting and a vast improvement over the stock heavy pull and generally does not require additional honing or polishing of the sear and hammer. We do offer separate #1 through #7 custom sear springs. These values are only approximate for Encores and have not been verified in G2s. For support, phone or email Tip: Print this page out so you have the disassembly/reassembly sequence and safety function checks handy. No printed detailed instructions come with the springs or pliers. Purchase our Bellm Trigger Job Instruction Manual Separate. This pliers and spring kit is one of the best ways to quickly make the Encore or G2 trigger more "user friendly" and help you do your best shooting. Mike Bellm's TCs has been serving the TC shooting community for over 30 years, you are buying from the trusted TC Encore and Contender expert. Small parts orders and other auctions can be combined shipping, your small parts and barrel orders will be packaged by a Bellm pro. We are a full time business helping shooters obtain the best results from their T/C since 1979, available for assistance by phone or email I'm always glad to help.

Price: 29.89 USD

Location: Olathe, Colorado

End Time: 2024-08-13T04:51:22.000Z

Shipping Cost: 0 USD