Description: Arizona Custom GripsUberti / Cimarron /Taylors & Co.- 1860 Army Richards-Mason Conversion-- 1860 Army Richards Transition Model-- 1871-1872 Open Top-- and other Uberti SAA style Revolvers with an 1860 Army sized grip frame (around 3-3/8” tall), such as the Taylor’s Gunfighter, the Uberti Callihan, the Cimarron Bad Boy, or the El Patron Grizzly Paw - (see below for details)~ Exclusive ~ MAGNA-TUSK™ Aged DISTRESSED iVORYwith classic checkering~~~~~two-PIECE (with SCREWHOLE) STYLEOne-Piece vs. Two-Piece Grips: Many people prefer the clean lines of a grip without a screwhole (One-Piece), while others prefer the look and convenience of a Two-Piece grip (with a screw), which is easier to remove for cleaning or maintenance. Both styles were originally made by Colt in the 1800’s, and both are historically correct. Whichever style you choose really depends on the look you are after. We manufacture both styles.Note: ANY of our grips, whether ONE-PIECE OR TWO PIECE style, will interchange and work on either style of grip frame. THIS AUCTION IS FOR THE TWO-PIECE (SCREWHOLE) STYLE.We include, free of charge, a conversion kit which allows these two-piece grips to mount onto a one-piece style grip frame (without a grip pin). Our conversion kit replaces the need for a grip pin and is actually a stronger design, and locks the grips up tight against the frame, allowing no movement. This gives you the advantage of the ease of maintenance of two-piece grips, while preserving the integrity of your revolver in original factory condition. Grip screw, conversion kit, and full instructions with illustrations are included with each set of grips. Whichever style you choose, you are guaranteed to get the best quality grips on the market, made to last a lifetime, for your shooting pleasure and enjoyment.10292000~~~~~ These grips WILL FIT the following Uberti revolvers (all of which will have a grip frame around 3-3/8” tall ):1860 Army Conversion and Open Top ModelsUberti / Cimarron 1860 Army Richards-Mason ConversionUberti / Cimarron 1860 Army Richards Transition Model Type IIUberti / Cimarron 1872 Open Top Army (also known as: Colt Model 1871 Open Top, or 1871-72 Open Top)Uberti / Taylor’s & Co. “C. Mason” 1860 Army Revolver. (Note: these will NOT fit the 1851 Navy style revolvers, which use a grip approx. 3-1/8” tall)Uberti / Taylor’s & Co. “Open Top” 1860 Army Revolver. (Again, these will NOT fit the 3-1/8” tall 1851 Navy style revolvers)THESE WILL ALSO FIT other Uberti made 1860 Army style revolvers chambered by Uberti to fire metallic cartridges, with a grip height of approx. 3-3/8”, such as the Uberti .44 Magnum Callahan, the Cimarron (Uberti) Bad Boy, the Taylor’s & Co. (Uberti) Gunfighter, or the Uberti El Patron Grizzly Paw. Please note that these will NOT fit the black powder percussion (cap & ball) 1860 Army models (see below). What these will NOT fit:Please note that these WILL NOT FIT the black powder percussion (cap & ball) style 1860 Army revolvers. These revolvers are made to shoot loose powder and ball, and use a different grip frame. Please be aware that just because you may be using a CONVERSION CYLINDER in an 1860 Army percussion revolver to fire metallic cartridges, if the revolver came from the factory set up as a percussion gun, you still have a percussion revolver frame, and these will NOT fit. Please contact us for the proper grips if you have the percussion style 1860 Army.In addition, these WILL NOT FIT anything with a 3-1/8” tall gripframe. Your grip frame MUST be around 3-3/8” tall for these to fit. It is important to double check your grip height before ordering, because some of the models listed above also ship with an 1851 Navy sized grip (at approx. 3-1/8”), which are shorter than the 1860 Army (at approx. 3-3/8”). Please contact us if you cannot locate the correct grips for your revolver; we are happy to help. 12272000 Arizona Custom Grips About our exclusive Magna-Tusk™ “Hi-Grade” Ivory and Stag Grips: Magna-Tusk™ Ivory and Stag grips, an exclusive of Arizona Custom Grips, are manufactured out of our super high-grade, ultra-high density material developed exclusively for our premium grip production. Vastly superior to standard bonded ivory or stag found on factory and other aftermarket grips, Magna-Tusk™ is capable of withstanding the heaviest recoil and impact, and is the toughest alternative grip material available today, while still retaining the pristine look of real ivory or stag. It is completely rock-solid, stable, and water, chemical, and oil resistant. It is flame and heat resistant, and is entirely void-free, with over 10x the strength, durability, and impact resistance of alternative materials. Unlike with real ivory or stag, there is no routine care and maintenance involved, with no danger of it drying out and cracking if not maintained properly or if left in the heat. It is filled with premium natural and synthetic compounds to produce outstanding aesthetic properties and mechanical performance. When aged with our exclusive aging process, it takes on the equivalent of a 100-year-old patina, with subtle grain details which many experts cannot tell apart from the real thing. In addition, the material has a fine grain structure, which holds intricate detail for carvings, artistic relief work, etc., found on many historic grips. About Our Aging Process: Unlike the lightweight artificial yellow plastic materials sometimes offered for sale, Magna-Tusk aged grips start out as a solid block of white virgin Magna-Tusk Ivory. Grip blanks are then milled from this premium material, incorporating both CNC techniques for blanking and finishing techniques similar to those used in manufacturing the originals. They are then carefully aged with our exclusive aging process, incorporating concentrated UV light (the essential aging property in natural sunlight). Our process produces an authentic appearance and genuine patina which extends into the surface, just like real ivory or stag. Not only does this give it the appearance of authenticity and depth, but this surface will not chip, crack, or peel like a superficially applied coating. Accept no substitutes. With Magna-Tusk aged grips, most experts cannot tell them apart from a decades-old or even a centuries-old original. While the quality difference is somewhat noticeable in the photos, the difference is even more apparent when seen and handled in person. Many of our repeat sales are made by the very customers we sell to, who take their custom-stocked revolvers to the range or club, where the quality difference is immediately seen and appreciated by fellow shooters. Magna-Tusk grips have all the authenticity of the originals, with several improvements over original materials including increased durability, and are made to last a lifetime. They feature subtle but authentic color mottling, grain variegation, and other authentic minute details found on original old Ivory and aged Stag, as seen on many of the revolvers which belonged to gunfighters and lawmen of the Old West. Dense, heavy, and solid, Magna-Tusk grips are in a class all their own. With our exclusive aging process, these grips are outstanding right out of the box, and will continue to improve over time. The more these grips are handled and used, the better they look! 030120 Grip screw included with all grips. The photo used is a stock photo (a sample pair). Yours will appear similar to these. Customer satisfaction is important to us – we guarantee we will do our best to ensure your complete satisfaction!!
Price: 89.95 USD
Location: Mesa, Arizona
End Time: 2023-11-13T02:08:39.000Z
Shipping Cost: 5.99 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
For Gun Make: Uberti 1860 Army Conversion & 1871 Open Top
Material/Finish: Magna-Tusk Ivory, Aged Distressed + Checkering
MPN: Does Not Apply
For Gun Type: Uberti 1860 Army Conversion & 1871 Open Top
Brand: Arizona Custom Grips
Available Variations
Color: Silver Liberty Eagle
Price: 94.95 USD
Available Quantity: 0
Quantity Sold: 0
Color: Gold Liberty Eagle
Price: 94.95 USD
Available Quantity: 0
Quantity Sold: 0
Color: Antique Nickel Steer Skull
Price: 94.95 USD
Available Quantity: 0
Quantity Sold: 0
Color: Red Steer Skull
Price: 94.95 USD
Available Quantity: 3
Quantity Sold: 3
Color: No Medallion
Price: 89.95 USD
Available Quantity: 110
Quantity Sold: 14
Color: Silver Colt
Price: 109.95 USD
Available Quantity: 100
Quantity Sold: 0
Color: Gold Colt
Price: 109.95 USD
Available Quantity: 101
Quantity Sold: 1
