Description: Arizona Custom GripsUBERTI SAA(SINGLE ACTION ARMY REVOLVERS)~ Exclusive ~ MAGNA-TUSK™Aged distressed ivory + Classic checkering~~~~~~~two-PIECE (with SCREWHOLE) STYLEOne-Piece vs. Two-Piece Grips: Many people prefer the clean lines of a grip without a screwhole (One-Piece), while others prefer the look and convenience of a Two-Piece grip (with a screw), which is easier to remove for cleaning or maintenance. Both styles were originally made by Colt in the 1800’s, and both are historically correct. Whichever style you choose really depends on the look you are after. We manufacture both styles.Note: ANY of our grips, whether ONE-PIECE OR TWO PIECE style, will interchange and work on either style of grip frame. THIS AUCTION IS FOR THE TWO-PIECE (SCREWHOLE) STYLE.We include, free of charge, a conversion kit which allows these two-piece grips to mount onto a one-piece style grip frame (without a grip pin). Our conversion kit replaces the need for a grip pin and is actually a stronger design, and locks the grips up tight against the frame, allowing no movement. This gives you the advantage of the ease of maintenance of two-piece grips, while preserving the integrity of your revolver in original factory condition. Grip screw, conversion kit, and full instructions with illustrations are included with each set of grips. Whichever style you choose, you are guaranteed to get the best quality grips on the market, made to last a lifetime, for your shooting pleasure and enjoyment.10292000 WHAT THESE WILL FIT (Please read this through in its entirety):These Grips WILL FIT: ANY of the standard sized UBERTI 1873 Single Action Army “plowhandle” style revolvers. These will be marked “Uberti,” and may also (but not necessarily) be marked by the U.S. importer, such as “Cimarron,” “Taylors & Co.”, “Navy Arms”, or “EMF”, etc. In addition to fitting any of the standard Uberti SAA style revolvers, our grips will fit any of the following:Uberti Revolvers: Cimarron / Uberti Cattleman, 1873 Cattleman II, Cimarron Model P, Evil Roy, El Patron, Hombre*, American Arms Regulator*, Cimarron New Sheriff, Uberti US 7th Cavalry, U.S.V. Artillery, and Cavalry Scout, Pistoleer, Holy Smoker, Wyatt Earp Buntline, Rooster Shooter, Chisholm, Cody, Desperado, Frisco, Old West, Stallion, Buntline, Horseman, SASS Pro, CMS Pro, E.M.F. Dakota II* or Dakota III*; Also: Taylor’s & Co. Smoke Wagon, Cattleman, Gambler, Cattleman 12-Shot, Runnin’ Iron, Taylor Marshall, Drifter, Devil Anse, Old Randall*, and Ranch Hand*;OR ANY OF THE OTHER STANDARD UBERTI “PLOWHANDLE” STYLE PISTOLS. *PLEASE NOTE: if you have a BRASS gripframe (such as found on the Hombre, the Regulator, the Dakota II or III, Old Randall, or Ranch Hand revolvers), you MUST contact us prior to ordering and let us check availability, as these incorporate additional grip requirements and machining cuts. What these WILL NOT FIT: 1. Please note that these grips are made to fit ONLY the Uberti Model 1873 style Single Action revolvers, with the typical “plowhandle” shaped gripframe, and will NOT fit other makes of revolvers (such as Pietta, Armi San Marco, Colt, Ruger, etc.). These grips will also NOT fit the Bisley, the Birdshead, the Thunderer or the Lightning style revolvers, from ANY maker, which use a completely different shaped grip frame. Please email if you have any questions.2. In addition, these WILL NOT FIT grip frames which are around 3-1/2” tall. To make sure you are ordering the correct grip, please check your grip frame measurement prior to ordering. Your grips or grip frame should measure somewhere between 3-1/16 – 3-1/8” tall, depending on how you hold your ruler, tape, or caliper. The important thing is to make sure they are NOT around 3-1/2” tall. Taylor & Co.’s Gunfighter, the El Patron Grizzly Paw, and the Uberti Callahan, for example, have the taller (3-1/2” tall) grip frame. If you have one of these, our Uberti 1860 Army Conversion & Metallic Cartridge revolver grips will work for these. Please send us an email and tell us your specific model if you cannot locate what you need, or if you have any questions. We are always happy to help.A note on the Italian-produced Revolvers: The Italian firms, located in Northern Italy, have been making SAA style revolvers now for well over a half century, and have made a huge number of makes and models and grip frame profiles with varying configurations over the years. We have an in-depth knowledge of the differing grip configurations, have a large library of gripframe variations from the various makers both old and new, and have vast experience making grips for Uberti, Pietta, Armi San Marco, and the other Italian gunmaking firms. Our experienced makers go to great lengths to ensure an exacting fit, including utilizing modern precision CNC production techniques, as well as incorporating old-time hand tuning and hand checking the fit of every grip on our reference frames prior to leaving our factory. We have a long list of many satisfied customers in the shooting industry who have purchased grips to use in a wide variety of applications, and we can safely and confidently guarantee proper fit and finish to your complete satisfaction.For an additional charge, custom fitting is an option. Please contact us for further details if you are interested in custom fitting. 10312000 Arizona Custom Grips About Magna-Tusk™ Ivory and Stag Grips: Magna-Tusk™ Ivory and Stag grips, a product of Arizona Custom Grips, are manufactured out of our high-grade, high density ivory material designed from the beginning as a premium, high-strength grip material. Vastly superior to standard bonded ivory or stag found on most factory and other aftermarket grips, Magna-Tusk™ is capable of withstanding the heaviest recoil and impact, and is the toughest alternative grip material available today, while still retaining the pristine look of real ivory or stag. It is rock-solid, stable, and water, chemical, and oil resistant. It is flame and heat resistant, and is entirely void-free, with over 10x the strength, durability, and impact resistance of alternative materials. Unlike with real ivory or stag, there is no routine care and maintenance involved, with no danger of it drying out and cracking if not maintained properly or if left in the heat. It is filled with premium natural compounds to produce outstanding aesthetic properties and mechanical performance. When aged with our natural aging process, it takes on the equivalent of a 100-year-old patina, with subtle grain details which many experts cannot tell apart from the real thing. In addition, the material has a fine grain structure, which holds intricate detail for carvings, artistic relief work, etc., found on many historic grips. 082920 About Our Aging Process: We go to great efforts to ensure that our Aged Ivory or Stag not only looks similar to, but in fact looks identical to the real thing. Our Magna-Tusk blanks will produce an aged Ivory grip unlike any other material made today. Our aged grips feature an authentic aged patina, just like the originals, with a process incorporating concentrated U.V. light (the essential aging property in natural sunlight), along with a developer/control agent that is put on the grips to carefully control U.V. absorption, in a sealed, high-oxygen environment to accelerate the natural aging process. Through this aging process, these grips become beautifully mottled, variegated, and weathered just like old, antique Ivory, and incorporate other authentic details found on original old Ivory as seen on many of the revolvers which belonged to gunfighters and lawmen of the Old West. As with real aged Ivory, Magna-Tusk develops a variegated patina due to its authentic grain structure, and natural aging produces an authentic appearance and genuine patina which extends into and below the surface. Not only does this give it the appearance of authenticity and depth, but this surface will not chip, crack, or peel like a superficially applied coating. With Magna-Tusk aged grips, most experts cannot tell them apart from a decades-old or even a centuries-old original. While the quality difference is somewhat noticeable in the photos, the difference is even more apparent when seen and handled in person. Many of our repeat sales are made by the very customers we sell to, who take their grips to the range, where our grips are immediately seen and noticed by others. If you are interested in ordering grips for a Brace of pistols, please order both sets together, and we will ensure a better matchup when selecting pairs. Dense, heavy, and solid, Magna-Tusk grips are in a class all their own. With our exclusive aging process, these grips are outstanding right out of the box, and will continue to improve over time. The more these grips are handled and used, the better they look! 082920 The photo used is a stock photo (a sample pair). Yours will appear similar to these. Customer satisfaction is important to us – we guarantee your complete satisfaction with every purchase!!
Price: 94.95 USD
Location: Mesa, Arizona
End Time: 2024-10-03T16:42:03.000Z
Shipping Cost: 5.99 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
For Gun Make: Uberti SAA Style Revolvers
Material/Finish: Magna-Tusk Ivory, Aged
MPN: Does Not Apply
For Gun Type: Uberti SAA Style Revolvers
Brand: Arizona Custom Grips
Available Variations
Color: Silver Liberty Eagle
Price: 104.95 USD
Available Quantity: 0
Quantity Sold: 0
Color: Gold Liberty Eagle
Price: 104.95 USD
Available Quantity: 1
Quantity Sold: 1
Color: Antique Nickel Steer Skull
Price: 104.95 USD
Available Quantity: 1
Quantity Sold: 1
Color: Red Steer Skull
Price: 104.95 USD
Available Quantity: 0
Quantity Sold: 0
Color: No Medallion
Price: 94.95 USD
Available Quantity: 105
Quantity Sold: 14
Color: Silver Colt
Price: 119.95 USD
Available Quantity: 103
Quantity Sold: 3
Color: Gold Colt
Price: 119.95 USD
Available Quantity: 99
Quantity Sold: 3
