WARRIOR ASSAULT SYSTEMS ELITE OPS ASSAULTERS BACK PANEL MOLLE HYDRATION PACK

Description: WARRIOR ASSAULT SYSTEMSELITE OPS ASSAULTERS BACK PANEL(temporarily out-of-stock) (This listing is for the base platform & pouch ONLY. Any magazines, vest, hydration equipment or accessories shown in image gallery for demonstration only) Available in Crye-Precision® Multicam™ & Coyote Tan The Assaulters Back Panel (ABP) is an innovative MOLLE panel developed by Warrior Assault Systems. Designed to be a light-weight and versatile platform, the ABP can be attached to any MOLLE compatible platform.Elite Ops Platforms are available HEREDesigned for Combat Troops and Law Enforcement operators, the ABP offers the ability to carry additional ammo and kit without the need for a bag or pack. These MOLLE Rear panels can hold 3 additional magazines and feature a large multi-purpose Rip-Off pouch on the lower section. The Rip-Off pouch is ideally used as a medic pouch or trauma kit, but is also suitable to carry breaching equipment, ammo, tools, food or other kit. Built in to the ABP is an internal hydration sleeve designed to hold a 3L Tactical Hydration Reservoir up to 3L capacity. The sleeve has a Velcro™ closure, drainage port and provision to hang your bladder. The sleeve is also suited to carriage of bolt-cutters and breaching equipment.Made from Genuine US MILSPEC materials and hardware, the Warrior Assault Systems kit is used around the world by Military, SF, Counter Terrorism and Law Enforcement units. Made from Genuine 500D Cordura™ Coyote Tan or Crye-Precision® Multicam™ fabricCompatible with all MOLLE and PALS platformsLow profile design ideal for deployment by vehicle, RIB or aircraftInternal hydration sleeve3 x built-in magazine pouches for 5.56 / M4 style magazinesMag Pouches with bungee retention system and Posigrip™ liningRemovable Velcro™ backed pouch with internal dividers and MILSPEC elastic loopsPouch has large opening with 2-way YKK™ coil zips with pull-tabsPouch dimensions 210mm x 140mm x 60mm Treated at manufacture to produce lowest possible IR signatureManufactured by UK company Warrior Assault Systems®NSN: N/ADIMENSIONS:W: 260mm H: 330mmD: n/aWeight: 460g500D Cordura Performance Specs: Weight: 7.1 Ounces per square yardTensile Strength: Warp 453lbs / Fill 348lbsTear strength: Warp 14.1 + lbs / Fill 14.1 + lbsAbrasion: Wear cycles 1955Water Repellency: 100% Webbing: Genuine US MILSPEC WebbingStandard colour options include genuine Crye-Precision® Multicam™, Black & Coyote25mm (1 Inch ) Breaking Strain: 1200 lbs38mm (1.5 Inch ) Breaking Strain: 1800 lbs50mm (2 Inch ) ) Breaking Strain: 2200 lbsInfra-Red Properties: All clips, fabrics, plastic hardware, threads and MultiCam™/Coyote Webbing are treated at source to deliver the lowest I.R. Signature possible. Plastic Hardware: Warrior Assault Systems uses only the highest quality ITW Military rated clips and accessories imported direct from the USA. We know how much punishment your pouches take when fitted to webbing, leg rigs, armour carriers, chest rigs and packs. With heavy-duty stitching and construction, these pouches are manufactured from Genuine CRYE Precision® Original Multicam™ fabric and highest quality MILSPEC materials.Battle tested by elite combat units in the British and Australian Army, these packs have proven themselves time and time again.These items are now in stock and ready to ship immediately. Ultra fast shipping service, get it yesterday! The Corps Shop is an Authorised Distributor of Warrior Assault Systems® products and equipment. SEE OUR COMPLETE RANGE OF WARRIOR ASSAULT SYSTEMS EQUIPMENT HERE Yes, we will combine shipping on multiple purchases. Yes, we ship to PO Box, Parcel Locker, APO, FPO and AFPO Addresses Be sure to add me to your favourites list! The Assaulters Back Panel (ABP) is an innovative MOLLE panel developed by Warrior Assault Systems. Designed to be a lightweight and versatile platform, the ABP can be attached to any MOLLE compatible platform. Our Warrior platforms are available HERE Designed for combat troops and law-enforcement operators, the ABP offers the ability to carry additional kit without needing to carry a bag or pack. These MOLLE rear panel can hold 3 additional magazines and feature a large multi-purpose rip-off pouch on the lower section. The Rip Off pouch is ideally used as a medic / trauma kit, but is suitable for breaching equipment, tools or other kit. Built in to the ABP is an internal hydration sleeve suitable for Tactical Hydration Reservoir 3L capacity. The sleeve has a Velcro™ top closure, provision to hang the bladder and drainage port. The sleeve is also suited for carriage of bolt-cutters or breaching equipment. The DCS is the latest evolution & hottest selling plate carriers from Warrior Assault Systems. Designed to be a lightweight and versatile low profile armour carrier, offering enhanced mobility without compromising protection. The DCS nails the balance between Fit, Form, Function & Value.Direct Action carrier & pouch kit supplied with: 1 x DCS platform, 1 x Triple mag pouch, 2 x Double Mag pouches, 1 x radio/mag pouch & 2 x utility pouches. **Developed in consultation with current serving UK Special Forces operators** **Tested, & Recommended by NTOA (National Tactical Officers Association)** **LAPD Approved equipment **The DCS holds most common 10" x 12" body armour inserts (hard & soft) & I.C.W. plates available in front & rear carriers. Side armour inserts (hard & soft) up to 6" x 8" can be installed in this carrier, in addition to 5" x 7" soft IIIA inserts.The DCS carrier is designed so that it can be employed with an additional PLB Battle Belt, Gunfighter Belt or FRAG Belt (available in our store), giving the operator greater flexibility with load-out & capability. Well thought-out design means extra comfort when seated in vehicles/aircraft. The DCS Carrier is fully adjustable for height & width and is lined with 3D Spacer mesh for added ballistic protection and operator comfort. Quick release clips allow removal of carrier without removing your helmet Made from Genuine US Mil Spec materials and hardware, the Warrior Assault Systems kit is used around the world by Military, SF, Counter Terrorism and Law Enforcement units. Made from Genuine 500D Cordura™ Coyote Tan or Crye-Precision® Multicam™ fabric,Compatible with all MOLLE and PALS equipment,Low profile carrier designed in Special Forces input,Holds 10" x 12" soft & hard armour inserts,Holds 6" x 8" soft & hard side armour inserts,Also holds 5" x 7" side IIIA side armour inserts,Built-in 3D spacer mesh to aid cooling, increase ballistic performance, improve operator comfort and rapid drying,Ultra light-weight without compromising durability or quality, less than 1.4kg platform (without plates), Fully adjustable shoulder straps with quick-release clips, Mil spec UTX D-Flex™ IR Treated clips & fasteners,Fully adjustable cummerbund,Compatible with Side Armour Pouch for additional protection,Padded shoulder straps can guide hydration tubes or Comms cables, External panels covered with MOLLE to attach extra kit,Supplied with pouches as follows:1 x radio / magazine pouch,1 x TMOP Triple Open mag pouch2 x SMOP Single Open mag pouches2 x SMUP Small Molle Utility Pouches Treated at manufacture to produce lowest possible IR signature,Manufactured by UK company Warrior Assault Systems®,NSN: N/ADIMENSIONS:W: n/a H: n/aD: n/aWeight: 2.1kgSize: M & L available SPECS: 500D Cordura Performance Specs: Weight: 7.1 Ounces per square yardTensile Strength: Warp 453lbs / Fill 348lbsTear strength: Warp 14.1 + lbs / Fill 14.1 + lbsAbrasion: Wear cycles 1955Water Repellency: 100% Webbing: Genuine US Mil Spec WebbingStandard colour options include genuine Crye-Precision® Multicam™, Black & Coyote25mm (1 Inch ) Breaking Strain: 1200 lbs38mm (1.5 Inch ) Breaking Strain: 1800 lbs50mm (2 Inch ) ) Breaking Strain: 2200 lbs Infra-Red Properties: All our clips, fabrics, plastic hardware, threads and MultiCam™/Coyote Webbing are treated at source to deliver the lowest I.R. Signature possible. Plastic Hardware:Warrior Assault Systems uses only the highest quality ITW Military rated clips and accessories imported direct from the USA. We know how much punishment your rig needs to take and how much you rely on it in the field or on OPs. With heavy-duty stitching and construction, these carriers are manufactured to the highest possible standards from Genuine 500D Cordura™ Crye-Precision® Original Multicam™ fabric and highest quality MIL-SPEC materials. Battle tested by elite SF combat units in the British Army, these rigs have proven themselves time and time again. Preferred armour carrier by US Law Enforcement and counter terrorism units. These items are now in stock in Australia and ready to ship immediately. Ultra fast shipping service, get it yesterday! Ultra-fast domestic & international shipping service. 100% customer satisfaction & feedback score, buy with confidence! YES, we will combine shipping on multiple purchases. Be sure to add me to your favourites list! -->

Price: 369.95 AUD

Location: Adelaide, South Australia

End Time: 2023-10-29T05:01:18.000Z

Shipping Cost: 13.91 AUD