Description: DESCRIPTION UPS HAT (D) For Raspberry Pi, Supports 21700 Li Battery (NOT Included), 5V Uninterruptible Power Supply, Pogo Pins Connector, Supports Charging And Power Output At The Same TimeUninterruptible Power Supply For Raspberry PiSupports Charging And Power Output At The Same Time, With Dynamic Path Management, Stable 5V OutputComes with online development resources and manualSAFETY CAUTIONSLi-ion and Li-po batteries are quite unstable. They may cause fire, personal injury, or property damage, if they're not properly recharged or used.Do not reversely connect the polarities when recharging or discharging the battery. Do not use inferior charger/charging panel to recharge the battery.Do not mix use old batteries with new ones, avoid using batteries of different brands.When buying Lithium battery, should always make sure the battery specification is compatible with the expansion board. Choose batteries from formal manufacturer, and ensure the batteries will work stably and safely by aging test.Lithium batteries have limited cycle life, they will also deteriorate as time goes by. Should be replaced with new ones when the batteries reaching their max cycle life, or working over two years, whichever comes first.Should be placed carefully and properly, keep it away from inflammables and explosives articles, away from children, avoid any safety accident caused by careless storage.Features At A GlanceThe UPS HAT (D) is an uninterruptible power supply (UPS) expansion board specially designed for the Raspberry Pi series. Onboard switching Li battery charging chip with path management, boost converter chip, and voltage/current monitoring chip which can monitor the operating state of the batteries via the I2C interface.Adopts pogo pins connector design, compatible with Raspberry Pi 3 / 3B+ / 4B, etc.Onboard Li battery charging chip, with dynamic path management, more stable power supplyOnboard boost converter chip for stable 5V power outputI2C bus communication, monitoring the batteries voltage, current, power, and remaining capacity in real timeMulti battery protection circuits: over charge/discharge protection, over current protection, short circuit protection, more safe and stableOnboard MCU management, supports detecting power connection and booting the Raspberry PiSupports displaying battery level on the system, easy to check the battery remaining capacityOnboard LED indicators for monitoring the battery operating statusComes with online development resources and manualSpecificationsOUTPUT VOLTAGE5VCONTROL BUSI2CBATTERY SUPPORT21700 Li battery × 2 (in parallel, NOT included)CHARGER SUPPORT5V (Type-C port)DIMENSIONS56 × 85mmMOUNTING HOLE SIZE3.0mmUninterruptible PowerIt is able to charge the batteries and provide power output at the same time from external power supplyAutomatically switch over to batteries output if external power supply is unavailable, keeps the system running without any trouble* for reference only, please refer to the Package Content for the detailed part listDynamic Path Management, More Stable Power SupplyWhen connected to the external power supply, the system will be powered and the battery will be charged at the same time, and the battery will be disconnected after being fully charged to avoid battery life damaging caused by frequent charging and dischargingWhen the external power supply is insufficient, the battery will provide power output together with the external power supply at the same time to ensure system normal operationWhen the external power supply is connected, the system will keep running normally even when the battery fails or is taken out. And automatically switch over to batteries output if the external power supply is unavailable, keeps the system running without any troubleSupports 21700 Large Capacity Li Battery,Longer Battery LifeOnboard Warning Indicators, Easy To Check If The Battery Is Connected CorrectlyPogo Pins ConnectorPowering The Raspberry Pi Via Pogo Pins, Without Using Any GPIO Resource,Compatible With Raspberry Pi 3 / 3B+ / 4B, Etc.Real Time MonitoringMonitoring The Batteries Voltage, Current, Power, And Remaining Capacity Via I2CWhen the voltage dips too low, it is possible to save files properly and then shut down the system by software, to avoid any data lossfor reference ONLY, the Raspberry Pi and Fan HAT are NOT included.Supports Battery Level Display AndDetecting Power ConnectionEasy To Check The Battery Status In Real-Time, And Automatically Shutdown When The Battery Level Is Low. Onboard MCU Chip For Detecting Power Connection And Automatically Rebooting The Raspberry PiOnbaord USB InteracesAdopts USB Type-C Interface For Charging And The USB Type-A Interface For 5V Power Output, Convenient For Powering Other BoardsProduct ShowOutline DimensionsResources & Services PACKAGE CONTENT Weight: 0.069 kgThe 21700 batteries are NOT includedUPS HAT (D) x1Acrylic protection panel x1Screws pack x1
Price: 35.99 USD
Location: Shenzhen
End Time: 2023-12-11T05:03:36.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: Waveshare
CONTROL BUS: I2C
Type: Battery
OUTPUT VOLTAGE: 5V
Model: UPS HAT (D) (EN)
Features: I2C bus communication
CHARGER SUPPORT: 5V (Type-C port)
BATTERY SUPPORT: 21700 Li battery × 2 (in parallel, NOT included)